Hi Sebastian, On Thu, 6 Dec 2018 at 08:10, Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> wrote: > > Hi, > > On Wed, Nov 14, 2018 at 05:07:03PM +0800, Baolin Wang wrote: > > This patch set adds some new features for SC27XX fuel gauge driver. > > > > 1. Read calibration data from eFuse device to calibrate fuel gauge. > > 2. Add low voltage alarm to adjust the battery capacity in lower > > voltage stage. > > 3. Add power management interfaces > > 4. Save last optimized battery capacity to be used as the initial > > battery capacity if system is not first power-on. > > > > Baolin Wang (2): > > dt-bindings: power: supply: Add nvmem properties to calibrate FGU > > power: supply: sc27xx: Add fuel gauge calibration > > > > Yuanjiang Yu (3): > > power: supply: sc27xx: Add fuel gauge low voltage alarm > > power: supply: sc27xx: Add suspend/resume interfaces > > power: supply: sc27xx: Save last battery capacity > > > > .../devicetree/bindings/power/supply/sc27xx-fg.txt | 4 + > > drivers/power/supply/sc27xx_fuel_gauge.c | 453 +++++++++++++++++++- > > 2 files changed, 444 insertions(+), 13 deletions(-) > > I applied patches 1-4 and skipped patch 5 due to pending changes. I will send new version with addressing comments in patch 5. Thanks. -- Baolin Wang Best Regards
