Hi, On Mon, Nov 26, 2018 at 05:27:55PM +0200, Priit Laes wrote: > From: Olliver Schinagl <oliver@xxxxxxxxxxx> > > Make use of the recommended BIT() macro for bit defines. > > Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx> > Signed-off-by: Priit Laes <plaes@xxxxxxxxx> > --- Thanks, queued to power-supply-next. -- Sebastian > drivers/power/supply/axp288_charger.c | 35 ++++++++++++++-------------- > 1 file changed, 18 insertions(+), 17 deletions(-) > > diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c > index 735658e..f8c6da9 100644 > --- a/drivers/power/supply/axp288_charger.c > +++ b/drivers/power/supply/axp288_charger.c > @@ -16,6 +16,7 @@ > */ > > #include <linux/acpi.h> > +#include <linux/bitops.h> > #include <linux/module.h> > #include <linux/device.h> > #include <linux/regmap.h> > @@ -29,17 +30,17 @@ > #include <linux/mfd/axp20x.h> > #include <linux/extcon.h> > > -#define PS_STAT_VBUS_TRIGGER (1 << 0) > -#define PS_STAT_BAT_CHRG_DIR (1 << 2) > -#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3) > -#define PS_STAT_VBUS_VALID (1 << 4) > -#define PS_STAT_VBUS_PRESENT (1 << 5) > +#define PS_STAT_VBUS_TRIGGER BIT(0) > +#define PS_STAT_BAT_CHRG_DIR BIT(2) > +#define PS_STAT_VBAT_ABOVE_VHOLD BIT(3) > +#define PS_STAT_VBUS_VALID BIT(4) > +#define PS_STAT_VBUS_PRESENT BIT(5) > > -#define CHRG_STAT_BAT_SAFE_MODE (1 << 3) > -#define CHRG_STAT_BAT_VALID (1 << 4) > -#define CHRG_STAT_BAT_PRESENT (1 << 5) > -#define CHRG_STAT_CHARGING (1 << 6) > -#define CHRG_STAT_PMIC_OTP (1 << 7) > +#define CHRG_STAT_BAT_SAFE_MODE BIT(3) > +#define CHRG_STAT_BAT_VALID BIT(4) > +#define CHRG_STAT_BAT_PRESENT BIT(5) > +#define CHRG_STAT_CHARGING BIT(6) > +#define CHRG_STAT_PMIC_OTP BIT(7) > > #define VBUS_ISPOUT_CUR_LIM_MASK 0x03 > #define VBUS_ISPOUT_CUR_LIM_BIT_POS 0 > @@ -52,33 +53,33 @@ > #define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */ > #define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */ > #define VBUS_ISPOUT_VHOLD_SET_4300MV 0x3 /* 4300mV */ > -#define VBUS_ISPOUT_VBUS_PATH_DIS (1 << 7) > +#define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7) > > #define CHRG_CCCV_CC_MASK 0xf /* 4 bits */ > #define CHRG_CCCV_CC_BIT_POS 0 > #define CHRG_CCCV_CC_OFFSET 200 /* 200mA */ > #define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */ > -#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */ > +#define CHRG_CCCV_ITERM_20P BIT(4) /* 20% of CC */ > #define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */ > #define CHRG_CCCV_CV_BIT_POS 5 > #define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */ > #define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */ > #define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */ > #define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */ > -#define CHRG_CCCV_CHG_EN (1 << 7) > +#define CHRG_CCCV_CHG_EN BIT(7) > > #define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */ > #define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */ > #define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */ > #define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */ > -#define CNTL2_CHGLED_TYPEB (1 << 4) > -#define CNTL2_CHG_OUT_TURNON (1 << 5) > +#define CNTL2_CHGLED_TYPEB BIT(4) > +#define CNTL2_CHG_OUT_TURNON BIT(5) > #define CNTL2_PC_TIMEOUT_MASK 0xC0 > #define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */ > #define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */ > #define CNTL2_PC_TIMEOUT_70MINS 0x3 > > -#define CHRG_ILIM_TEMP_LOOP_EN (1 << 3) > +#define CHRG_ILIM_TEMP_LOOP_EN BIT(3) > #define CHRG_VBUS_ILIM_MASK 0xf0 > #define CHRG_VBUS_ILIM_BIT_POS 4 > #define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */ > @@ -94,7 +95,7 @@ > #define CHRG_VLTFC_0C 0xA5 /* 0 DegC */ > #define CHRG_VHTFC_45C 0x1F /* 45 DegC */ > > -#define FG_CNTL_OCV_ADJ_EN (1 << 3) > +#define FG_CNTL_OCV_ADJ_EN BIT(3) > > #define CV_4100MV 4100 /* 4100mV */ > #define CV_4150MV 4150 /* 4150mV */ > -- > git-series 0.9.1
Attachment:
signature.asc
Description: PGP signature
