[PATCH v2 3/4] serial: 8250-mtk: add uart DMA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Modify uart register to support DMA function.

Signed-off-by: Long Cheng <long.cheng@xxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_mtk.c |  210 +++++++++++++++++++++++++++++++++++-
 1 file changed, 209 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index dd5e1ce..1da73e8 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -14,6 +14,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 
 #include "8250.h"
 
@@ -22,12 +26,172 @@
 #define UART_MTK_SAMPLE_POINT	0x0b	/* Sample point register */
 #define MTK_UART_RATE_FIX	0x0d	/* UART Rate Fix Register */
 
+#define MTK_UART_DMA_EN		0x13	/* DMA Enable register */
+#define MTK_UART_DMA_EN_TX	0x2
+#define MTK_UART_DMA_EN_RX	0x5
+
+#define MTK_UART_TX_SIZE	UART_XMIT_SIZE
+#define MTK_UART_RX_SIZE	0x8000
+#define MTK_UART_TX_TRIGGER	1
+#define MTK_UART_RX_TRIGGER	MTK_UART_RX_SIZE
+
+#ifdef CONFIG_SERIAL_8250_DMA
+enum dma_rx_status {
+	DMA_RX_START = 0,
+	DMA_RX_RUNNING = 1,
+	DMA_RX_SHUTDOWN = 2,
+};
+#endif
+
 struct mtk8250_data {
 	int			line;
+	unsigned int		rx_pos;
 	struct clk		*uart_clk;
 	struct clk		*bus_clk;
+	struct uart_8250_dma	*dma;
+#ifdef CONFIG_SERIAL_8250_DMA
+	enum dma_rx_status	rx_status;
+#endif
 };
 
+#ifdef CONFIG_SERIAL_8250_DMA
+static void mtk8250_rx_dma(struct uart_8250_port *up);
+
+static void mtk8250_dma_rx_complete(void *param)
+{
+	struct uart_8250_port *up = param;
+	struct uart_8250_dma *dma = up->dma;
+	struct mtk8250_data *data = up->port.private_data;
+	struct tty_port *tty_port = &up->port.state->port;
+	struct dma_tx_state state;
+	unsigned char *ptr;
+	int copied;
+
+	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
+				dma->rx_size, DMA_FROM_DEVICE);
+
+	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+
+	if (data->rx_status == DMA_RX_SHUTDOWN)
+		return;
+
+	if ((data->rx_pos + state.residue) <= dma->rx_size) {
+		ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
+		copied = tty_insert_flip_string(tty_port, ptr, state.residue);
+	} else {
+		ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
+		copied = tty_insert_flip_string(tty_port, ptr,
+						dma->rx_size - data->rx_pos);
+		ptr = (unsigned char *)(dma->rx_buf);
+		copied += tty_insert_flip_string(tty_port, ptr,
+				data->rx_pos + state.residue - dma->rx_size);
+	}
+	up->port.icount.rx += copied;
+
+	tty_flip_buffer_push(tty_port);
+
+	mtk8250_rx_dma(up);
+}
+
+static void mtk8250_rx_dma(struct uart_8250_port *up)
+{
+	struct uart_8250_dma *dma = up->dma;
+	struct mtk8250_data *data = up->port.private_data;
+	struct dma_async_tx_descriptor	*desc;
+	struct dma_tx_state	 state;
+
+	desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
+					   dma->rx_size, DMA_DEV_TO_MEM,
+					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		pr_err("failed to prepare rx slave single\n");
+		return;
+	}
+
+	desc->callback = mtk8250_dma_rx_complete;
+	desc->callback_param = up;
+
+	dma->rx_cookie = dmaengine_submit(desc);
+
+	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+	data->rx_pos = state.residue;
+
+	dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
+				   dma->rx_size, DMA_FROM_DEVICE);
+
+	dma_async_issue_pending(dma->rxchan);
+}
+
+static void mtk8250_dma_enable(struct uart_8250_port *up)
+{
+	struct uart_8250_dma *dma = up->dma;
+	struct mtk8250_data *data = up->port.private_data;
+	int lcr = serial_in(up, UART_LCR);
+
+	if (data->rx_status != DMA_RX_START)
+		return;
+
+	dma->rxconf.direction		= DMA_DEV_TO_MEM;
+	dma->rxconf.src_addr_width	= dma->rx_size / 1024;
+	dma->rxconf.src_addr		= dma->rx_addr;
+
+	dma->txconf.direction		= DMA_MEM_TO_DEV;
+	dma->txconf.dst_addr_width	= MTK_UART_TX_SIZE / 1024;
+	dma->txconf.dst_addr		= dma->tx_addr;
+
+	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+		UART_FCR_CLEAR_XMIT);
+	serial_out(up, MTK_UART_DMA_EN,
+		   MTK_UART_DMA_EN_RX | MTK_UART_DMA_EN_TX);
+
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+	serial_out(up, UART_EFR, UART_EFR_ECB);
+	serial_out(up, UART_LCR, lcr);
+
+	if (dmaengine_slave_config(dma->rxchan, &dma->rxconf) != 0)
+		pr_err("failed to configure rx dma channel\n");
+	if (dmaengine_slave_config(dma->txchan, &dma->txconf) != 0)
+		pr_err("failed to configure tx dma channel\n");
+
+	data->rx_status = DMA_RX_RUNNING;
+	data->rx_pos = 0;
+	mtk8250_rx_dma(up);
+}
+#endif
+
+static int mtk8250_startup(struct uart_port *port)
+{
+#ifdef CONFIG_SERIAL_8250_DMA
+	struct uart_8250_port *up = up_to_u8250p(port);
+	struct mtk8250_data *data = port->private_data;
+
+	/* disable DMA for console */
+	if (uart_console(port))
+		up->dma = NULL;
+
+	if (up->dma) {
+		data->rx_status = DMA_RX_START;
+		uart_circ_clear(&port->state->xmit);
+	}
+#endif
+	memset(&port->icount, 0, sizeof(port->icount));
+
+	return serial8250_do_startup(port);
+}
+
+static void mtk8250_shutdown(struct uart_port *port)
+{
+#ifdef CONFIG_SERIAL_8250_DMA
+	struct uart_8250_port *up = up_to_u8250p(port);
+	struct mtk8250_data *data = port->private_data;
+
+	if (up->dma)
+		data->rx_status = DMA_RX_SHUTDOWN;
+#endif
+
+	return serial8250_do_shutdown(port);
+}
+
 static void
 mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
@@ -36,6 +200,17 @@ struct mtk8250_data {
 	unsigned long flags;
 	unsigned int baud, quot;
 
+#ifdef CONFIG_SERIAL_8250_DMA
+	if (up->dma) {
+		if (uart_console(port)) {
+			devm_kfree(up->port.dev, up->dma);
+			up->dma = NULL;
+		} else {
+			mtk8250_dma_enable(up);
+		}
+	}
+#endif
+
 	serial8250_do_set_termios(port, termios, old);
 
 	/*
@@ -143,9 +318,20 @@ static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
 		pm_runtime_put_sync_suspend(port->dev);
 }
 
+#ifdef CONFIG_SERIAL_8250_DMA
+static bool mtk8250_dma_filter(struct dma_chan *chan, void *param)
+{
+	return false;
+}
+#endif
+
 static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
 			   struct mtk8250_data *data)
 {
+#ifdef CONFIG_SERIAL_8250_DMA
+	int dmacnt;
+#endif
+
 	data->uart_clk = devm_clk_get(&pdev->dev, "baud");
 	if (IS_ERR(data->uart_clk)) {
 		/*
@@ -162,7 +348,23 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
 	}
 
 	data->bus_clk = devm_clk_get(&pdev->dev, "bus");
-	return PTR_ERR_OR_ZERO(data->bus_clk);
+	if (IS_ERR(data->bus_clk))
+		return PTR_ERR(data->bus_clk);
+
+	data->dma = NULL;
+#ifdef CONFIG_SERIAL_8250_DMA
+	dmacnt = of_property_count_strings(pdev->dev.of_node, "dma-names");
+	if (dmacnt == 2) {
+		data->dma = devm_kzalloc(&pdev->dev, sizeof(*data->dma),
+					 GFP_KERNEL);
+		data->dma->fn = mtk8250_dma_filter;
+		data->dma->rx_size = MTK_UART_RX_SIZE;
+		data->dma->rxconf.src_maxburst = MTK_UART_RX_TRIGGER;
+		data->dma->txconf.dst_maxburst = MTK_UART_TX_TRIGGER;
+	}
+#endif
+
+	return 0;
 }
 
 static int mtk8250_probe(struct platform_device *pdev)
@@ -204,8 +406,14 @@ static int mtk8250_probe(struct platform_device *pdev)
 	uart.port.iotype = UPIO_MEM32;
 	uart.port.regshift = 2;
 	uart.port.private_data = data;
+	uart.port.shutdown = mtk8250_shutdown;
+	uart.port.startup = mtk8250_startup;
 	uart.port.set_termios = mtk8250_set_termios;
 	uart.port.uartclk = clk_get_rate(data->uart_clk);
+#ifdef CONFIG_SERIAL_8250_DMA
+	if (data->dma)
+		uart.dma = data->dma;
+#endif
 
 	/* Disable Rate Fix function */
 	writel(0x0, uart.port.membase +
-- 
1.7.9.5




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux