Hi Chris,
On Thu, Nov 29, 2018 at 2:07 PM Chris Brandt <chris.brandt@xxxxxxxxxxx> wrote:
> Add support for Renesas RZ/A2M evaluation board.
>
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
Thanks for your patch!
> index 000000000000..9570aeb8f1ce
> --- /dev/null
> +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> @@ -0,0 +1,133 @@
> +/*
> + * Device Tree Source for the RZA2MEVB board
> + *
> + * Copyright (C) 2018 Renesas Electronics
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
Let's see about the license...
> +/ {
> + model = "RZA2MEVB";
> + compatible = "renesas,rza2mevb", "renesas,r7s9210";
> +
> + aliases {
> + serial0 = &scif4;
> + };
> +
> + chosen {
> + bootargs = "ignore_loglevel earlycon rootfstype=cramfs root=mtd:rootfs";
I wouldn't put "earlycon" in the default bootargs.
It's meant for debugging.
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@80000000 {
40000000
> + device_type = "memory";
> + reg = <0x40000000 0x00800000>; /* HyperRAM */
> + };
> +
> + lbsc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + leds {
> + status = "okay";
Please drop this line, "okay" is the default.
> + compatible = "gpio-leds";
> +
> + led0 {
> + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
There's a second (yellow green) LED connected to PC_1.
Hence
red {
gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
};
green {
gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
}
> + };
> + };
> +&pinctrl {
> +
Please drop this blank line.
> + /* Serial Console */
> + scif4_pins: serial4 {
> + pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
> + <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
> + };
> +};
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
