[PATCH 3/4] ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset signal of the SSD1306 OLED display is actually active-low.
Adapt the DT to reflect the real world.

Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
 arch/arm/boot/dts/imx28-cfa10036.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 8337ca2..d6eca31 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -95,7 +96,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&ssd1306_cfa10036>;
 					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
+					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 					solomon,height = <32>;
 					solomon,width = <128>;
 					solomon,page-offset = <0>;
-- 
2.1.4





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux