[PATCH 8/8] arm64: dts: add pcie nodes for MT2712

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>

This patch add device node for mt2712 pcie.

Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 63 +++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e8afb54..976d92a 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -791,6 +791,69 @@
 		};
 	};
 
+	pcie: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>,
+		      <0 0x112ff000 0 0x1000>;
+		reg-names = "port0", "port1";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
+		phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+
+		pcie0: pcie@0,0 {
+			device_type = "pci";
+			status = "disabled";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1,0 {
+			device_type = "pci";
+			status = "disabled";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
 	mfgcfg: syscon@13000000 {
 		compatible = "mediatek,mt2712-mfgcfg", "syscon";
 		reg = <0 0x13000000 0 0x1000>;
-- 
1.9.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux