Re: RESEND [PATCH V9 2/2] ARM: dts: exynos5250: Enable ahci sata and sata phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




kgene,
Please pick this patch.

On Tue, Mar 4, 2014 at 7:02 PM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>
>
> On Tuesday 04 March 2014 04:40 PM, Yuvaraj Kumar C D wrote:
>>
>> This patch adds dt entry for ahci sata controller and its
>> corresponding phy controller.phy node has been added w.r.t
>> new generic phy framework.
>>
>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
>
>
> FWIW
> Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>
>> ---
>>   .../devicetree/bindings/ata/exynos-sata-phy.txt    |   14 --------
>>   .../devicetree/bindings/ata/exynos-sata.txt        |   25 +++++++++-----
>>   .../devicetree/bindings/phy/samsung-phy.txt        |   36
>> ++++++++++++++++++++
>>   arch/arm/boot/dts/exynos5250-arndale.dts           |   21 ++++++++++++
>>   arch/arm/boot/dts/exynos5250-smdk5250.dts          |   17 +++++----
>>   arch/arm/boot/dts/exynos5250.dtsi                  |   18 +++++++---
>>   6 files changed, 98 insertions(+), 33 deletions(-)
>>   delete mode 100644
>> Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>>
>> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>> b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>> deleted file mode 100644
>> index 37824fa..0000000
>> --- a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>> +++ /dev/null
>> @@ -1,14 +0,0 @@
>> -* Samsung SATA PHY Controller
>> -
>> -SATA PHY nodes are defined to describe on-chip SATA Physical layer
>> controllers.
>> -Each SATA PHY controller should have its own node.
>> -
>> -Required properties:
>> -- compatible        : compatible list, contains
>> "samsung,exynos5-sata-phy"
>> -- reg               : <registers mapping>
>> -
>> -Example:
>> -        sata@ffe07000 {
>> -                compatible = "samsung,exynos5-sata-phy";
>> -                reg = <0xffe07000 0x1000>;
>> -        };
>> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt
>> b/Documentation/devicetree/bindings/ata/exynos-sata.txt
>> index 0849f10..b2adb1f 100644
>> --- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
>> +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
>> @@ -4,14 +4,21 @@ SATA nodes are defined to describe on-chip Serial ATA
>> controllers.
>>   Each SATA controller should have its own node.
>>
>>   Required properties:
>> -- compatible        : compatible list, contains "samsung,exynos5-sata"
>> -- interrupts        : <interrupt mapping for SATA IRQ>
>> -- reg               : <registers mapping>
>> -- samsung,sata-freq : <frequency in MHz>
>> +- compatible           : compatible list, contains "samsung,exynos5-sata"
>> +- interrupts           : <interrupt mapping for SATA IRQ>
>> +- reg                  : <registers mapping>
>> +- samsung,sata-freq    : <frequency in MHz>
>> +- phys                 : as mentioned in phy-bindings.txt
>> +- phy-names            : as mentioned in phy-bindings.txt
>>
>>   Example:
>> -        sata@ffe08000 {
>> -                compatible = "samsung,exynos5-sata";
>> -                reg = <0xffe08000 0x1000>;
>> -                interrupts = <115>;
>> -        };
>> +       sata@122f0000 {
>> +               compatible = "snps,dwc-ahci";
>> +               samsung,sata-freq = <66>;
>> +               reg = <0x122f0000 0x1ff>;
>> +               interrupts = <0 115 0>;
>> +               clocks = <&clock 277>, <&clock 143>;
>> +               clock-names = "sata", "sclk_sata";
>> +               phys = <&sata_phy>;
>> +               phy-names = "sata-phy";
>> +       };
>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> index c0fccaa..a937f75 100644
>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> @@ -20,3 +20,39 @@ Required properties:
>>   - compatible : should be "samsung,exynos5250-dp-video-phy";
>>   - reg : offset and length of the Display Port PHY register set;
>>   - #phy-cells : from the generic PHY bindings, must be 0;
>> +
>> +Samsung SATA PHY Controller
>> +---------------------------
>> +
>> +SATA PHY nodes are defined to describe on-chip SATA Physical layer
>> controllers.
>> +Each SATA PHY controller should have its own node.
>> +
>> +Required properties:
>> +- compatible        : compatible list, contains
>> "samsung,exynos5250-sata-phy"
>> +- reg : offset and length of the SATA PHY register set;
>> +- #phy-cells : from the generic phy bindings;
>> +
>> +Example:
>> +       sata_phy: sata-phy@12170000 {
>> +               compatible = "samsung,exynos5250-sata-phy";
>> +               reg = <0x12170000 0x1ff>;
>> +               clocks = <&clock 287>;
>> +               clock-names = "sata_phyctrl";
>> +               #phy-cells = <0>;
>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
>> +               samsung,syscon-phandle = <&pmu_syscon>;
>> +       };
>> +
>> +Device-Tree bindings for sataphy i2c client driver
>> +--------------------------------------------------
>> +
>> +Required properties:
>> +compatible: Should be "samsung,exynos-sataphy-i2c"
>> +- reg: I2C address of the sataphy i2c device.
>> +
>> +Example:
>> +
>> +       sata_phy_i2c:sata-phy@38 {
>> +               compatible = "samsung,exynos-sataphy-i2c";
>> +               reg = <0x38>;
>> +       };
>> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
>> b/arch/arm/boot/dts/exynos5250-arndale.dts
>> index 38b96a4..97eef40 100644
>> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
>> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
>> @@ -375,6 +375,27 @@
>>                 };
>>         };
>>
>> +       i2c@121D0000 {
>> +               status = "okay";
>> +               samsung,i2c-sda-delay = <100>;
>> +               samsung,i2c-max-bus-freq = <40000>;
>> +               samsung,i2c-slave-addr = <0x38>;
>> +
>> +               sata_phy_i2c:sata-phy@38 {
>> +                       compatible = "samsung,exynos-sataphy-i2c";
>> +                       reg = <0x38>;
>> +               };
>> +       };
>> +
>> +       sata@122F0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       sata-phy@12170000 {
>> +               status = "okay";
>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
>> +       };
>> +
>>         mmc_0: mmc@12200000 {
>>                 status = "okay";
>>                 num-slots = <1>;
>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> index f76946e..81782c1b 100644
>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> @@ -242,16 +242,12 @@
>>                 samsung,i2c-slave-addr = <0x38>;
>>                 status = "okay";
>>
>> -               sata-phy {
>> -                       compatible = "samsung,sata-phy";
>> +               sata_phy_i2c:sata-phy@38 {
>> +                       compatible = "samsung,exynos-sataphy-i2c";
>>                         reg = <0x38>;
>>                 };
>>         };
>>
>> -       sata@122F0000 {
>> -               samsung,sata-freq = <66>;
>> -       };
>> -
>>         i2c@12C80000 {
>>                 samsung,i2c-sda-delay = <100>;
>>                 samsung,i2c-max-bus-freq = <66000>;
>> @@ -274,6 +270,15 @@
>>                 };
>>         };
>>
>> +       sata@122F0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       sata-phy@12170000 {
>> +               status = "okay";
>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
>> +       };
>> +
>>         mmc@12200000 {
>>                 status = "okay";
>>                 num-slots = <1>;
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>> b/arch/arm/boot/dts/exynos5250.dtsi
>> index 8f6300f..31f7cab 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -46,6 +46,7 @@
>>                 i2c6 = &i2c_6;
>>                 i2c7 = &i2c_7;
>>                 i2c8 = &i2c_8;
>> +               i2c9 = &i2c_9;
>>                 pinctrl0 = &pinctrl_0;
>>                 pinctrl1 = &pinctrl_1;
>>                 pinctrl2 = &pinctrl_2;
>> @@ -233,16 +234,25 @@
>>         };
>>
>>         sata@122F0000 {
>> -               compatible = "samsung,exynos5-sata-ahci";
>> +               compatible = "snps,dwc-ahci";
>> +               samsung,sata-freq = <66>;
>>                 reg = <0x122F0000 0x1ff>;
>>                 interrupts = <0 115 0>;
>>                 clocks = <&clock 277>, <&clock 143>;
>>                 clock-names = "sata", "sclk_sata";
>> +               phys = <&sata_phy>;
>> +               phy-names = "sata-phy";
>> +               status = "disabled";
>>         };
>>
>> -       sata-phy@12170000 {
>> -               compatible = "samsung,exynos5-sata-phy";
>> +       sata_phy: sata-phy@12170000 {
>> +               compatible = "samsung,exynos5250-sata-phy";
>>                 reg = <0x12170000 0x1ff>;
>> +               clocks = <&clock 287>;
>> +               clock-names = "sata_phyctrl";
>> +               #phy-cells = <0>;
>> +               samsung,syscon-phandle = <&pmu_system_controller>;
>> +               status = "disabled";
>>         };
>>
>>         i2c_0: i2c@12C60000 {
>> @@ -360,7 +370,7 @@
>>                 status = "disabled";
>>         };
>>
>> -       i2c@121D0000 {
>> +       i2c_9: i2c@121D0000 {
>>                   compatible = "samsung,exynos5-sata-phy-i2c";
>>                   reg = <0x121D0000 0x100>;
>>                   #address-cells = <1>;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux