F1C100s is one product with the suniv die, which has a 32MiB co-packaged
DDR1 DRAM chip. As we have the support for suniv pin controller and CCU now, add a
initial DTSI for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@xxxxxxxxx>
---
arch/arm/boot/dts/suniv-f1c100s.dtsi | 147 +++++++++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
new file mode 100644
index 0000000..aff5f90
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@xxxxxxx>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@xxxxxxxxx>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ clocks {
+ osc24M: clk-24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk-32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram-controller@1c00000 {
+ compatible = "allwinner,suniv-f1c100s-system-control",
+ "allwinner,sun4i-a10-system-control";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_d: sram@10000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0 {
+ compatible = "allwinner,suniv-f1c100s-sram-d",
+ "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ccu: clock@1c20000 {
+ compatible = "allwinner,suniv-f1c100s-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ intc: interrupt-controller@1c20400 {
+ compatible = "allwinner,suniv-f1c100s-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,suniv-f1c100s-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <38>, <39>, <40>;
+ clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ uart0_pe_pins: uart0-pe-pins {
+ pins = "PE0", "PE1";
+ function = "uart0";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,suniv-f1c100s-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <13>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@1c20ca0 {
+ compatible = "allwinner,suniv-f1c100s-wdt",
+ "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20ca0 0x20>;
+ };
+
+ uart0: serial@1c25000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 38>;
+ resets = <&ccu 24>;
+ status = "disabled";
+ };
+
+ uart1: serial@1c25400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 39>;
+ resets = <&ccu 25>;
+ status = "disabled";
+ };
+
+ uart2: serial@1c25800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c25800 0x400>;
+ interrupts = <3>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu 40>;
+ resets = <&ccu 26>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
