> +
> +/*
> + * USBSS-DEV register interface.
> + * This corresponds to the USBSS Device Controller Interface */
> +/**
> + * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
struct cdns3_usb_regs - device controller registers
> +struct cdns3_device;
> +
> +struct cdns3_endpoint {
> + struct usb_ep endpoint;
> + struct list_head request_list;
> + struct list_head ep_match_pending_list;
> +
> + struct cdns3_trb *trb_pool;
> + dma_addr_t trb_pool_dma;
> +
> + struct cdns3_device *cdns3_dev;
> + char name[20];
> +
> +#define EP_ENABLED BIT(0)
> +#define EP_STALL BIT(1)
> +#define EP_WEDGE BIT(2)
> +#define EP_TRANSFER_STARTED BIT(3)
> +#define EP_UPDATE_EP_TRBADDR BIT(4)
> +#define EP_PENDING_REQUEST BIT(5)
> +#define EP_USED BIT(5)
> + u32 flags;
> +
> + void *aligned_buff;
> + dma_addr_t aligned_dma_addr;
> + u8 dir;
> + u8 num;
> + u8 type;
> +
> + int free_trbs;
> + u8 pcs;
> + u8 ccs;
> + int enqueue;
> + int dequeue;
> +};
> +
Would you please add kernel doc for above structure?
> +struct cdns3_request {
> + struct usb_request request;
> + struct cdns3_endpoint *priv_ep;
> + struct cdns3_trb *trb;
> + int start_trb;
> + int end_trb;
> + int on_ring:1;
> +};
> +
> +#define to_cdns3_request(r) (container_of(r, struct cdns3_request,
> +request))
> +
> +struct cdns3_device {
> + struct device dev;
> + struct cdns3_usb_regs __iomem *regs;
> +
> + struct usb_gadget gadget;
> + struct usb_gadget_driver *gadget_driver;
> +
> + struct usb_ctrlrequest *setup;
> + dma_addr_t setup_dma;
> + dma_addr_t trb_ep0_dma;
> + struct cdns3_trb *trb_ep0;
> + void *zlp_buf;
> +
> + struct cdns3_endpoint *eps[USB_SS_ENDPOINTS_MAX_COUNT];
> + int ep_nums;
> + /*
> + * field used for improving performance. It holds the last
> + * selected endpoint number
> + */
> + u32 selected_ep;
> + struct usb_request *ep0_request;
> + int ep0_data_dir;
> + int hw_configured_flag;
> + int wake_up_flag;
> + u16 isoch_delay;
> + /* generic spin-lock for drivers */
> + spinlock_t lock;
> +
> + unsigned is_connected:1;
> + unsigned in_standby_mode:1;
> + unsigned status_completion_no_call:1;
> + unsigned u1_allowed:1;
> + unsigned u2_allowed:1;
> +
> + u32 usb_ien;
> + u32 ep_ien;
> + int setup_pending;
> + struct device *sysdev;
> + /* The device mode is enabled */
> + int start_gadget;
> + struct list_head ep_match_list;
> + /* KB */
> + int onchip_mem_allocated_size;
> + /* Memory is allocated for OUT */
> + int out_mem_is_allocated:1;
> + struct work_struct pending_status_wq;
> + struct usb_request *pending_status_request;
> +};
> +
kernel-doc please
Peter
