[PATCH v1 0/3] arm64: dts: qcom: sdm845: Add SD nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds the nodes for the SD host controller on SDM845, and wires it
up on the MTP.

Though I tested similar changes on another board, I was unable to actually run
this on an MTP. If someone felt like trying this out on an MTP I would be
grateful.

The original downstream nodes had sleep pinctrl states. It's not obvious to
me that all this messing with drive-strength saves non-negligible amounts of
power, so I didn't add them and figured we could add them later if needed.


Evan Green (3):
  dt-bindings: mmc: sdhci-msm: Clarify register requirements
  arm64: dts: qcom: sdm845: Add SD nodes
  arm64: dts: qcom: sdm845: Add SD nodes for sdm845-mtp

 .../devicetree/bindings/mmc/sdhci-msm.txt     |  2 +-
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts       | 53 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 15 ++++++
 3 files changed, 69 insertions(+), 1 deletion(-)

-- 
2.18.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux