All IRQs except for IRQ 0 seem to not need acking, so drop acking for them.
The ENMI needs to have the ack done *after* clearing the interrupt source,
otherwise we will get a spurious interrupt for each real interrupt.
So use the new IRQCHIP_EOI_THREADED flag for this in combination with
handle_fasteoi_irq. This uses a separate irq_chip struct for IRQ 0,
since we only want this behavior for IRQ 0.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/irqchip/irq-sun4i.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
index 8a2fbee..a0ed1ea 100644
--- a/drivers/irqchip/irq-sun4i.c
+++ b/drivers/irqchip/irq-sun4i.c
@@ -76,16 +76,29 @@ static void sun4i_irq_unmask(struct irq_data *irqd)
static struct irq_chip sun4i_irq_chip = {
.name = "sun4i_irq",
- .irq_ack = sun4i_irq_ack,
.irq_mask = sun4i_irq_mask,
.irq_unmask = sun4i_irq_unmask,
};
+/* IRQ 0 / the ENMI needs a late eoi call */
+static struct irq_chip sun4i_irq_chip_enmi = {
+ .name = "sun4i_irq",
+ .irq_eoi = sun4i_irq_ack,
+ .irq_mask = sun4i_irq_mask,
+ .irq_unmask = sun4i_irq_unmask,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+};
+
static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw)
{
- irq_set_chip_and_handler(virq, &sun4i_irq_chip,
- handle_level_irq);
+ if (hw == 0)
+ irq_set_chip_and_handler(virq, &sun4i_irq_chip_enmi,
+ handle_fasteoi_irq);
+ else
+ irq_set_chip_and_handler(virq, &sun4i_irq_chip,
+ handle_level_irq);
+
set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
return 0;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
