On Tue, 20 Nov 2018, Charles Keepax wrote: > Lochnagar is an evaluation and development board for Cirrus > Logic Smart CODEC and Amp devices. It allows the connection of > most Cirrus Logic devices on mini-cards, as well as allowing > connection of various application processor systems to provide a > full evaluation platform. This driver supports the board > controller chip on the Lochnagar board. Audio system topology, > clocking and power can all be controlled through the Lochnagar > controller chip, allowing the device under test to be used in > a variety of possible use cases. > > As the Lochnagar is a fairly complex device this MFD driver > allows the drivers for the various features to be bound > in. Initially clocking, regulator and pinctrl will be added as > these are necessary to configure the system. But in time at least > audio and voltage/current monitoring will also be added. > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> > --- > > No change since v4. > > Thanks, > Charles > > MAINTAINERS | 17 ++ > drivers/mfd/Kconfig | 8 + > drivers/mfd/Makefile | 2 + > drivers/mfd/lochnagar-i2c.c | 394 ++++++++++++++++++++++++++++++++++++ > include/linux/mfd/lochnagar.h | 55 +++++ > include/linux/mfd/lochnagar1_regs.h | 157 ++++++++++++++ > include/linux/mfd/lochnagar2_regs.h | 253 +++++++++++++++++++++++ > 7 files changed, 886 insertions(+) > create mode 100644 drivers/mfd/lochnagar-i2c.c > create mode 100644 include/linux/mfd/lochnagar.h > create mode 100644 include/linux/mfd/lochnagar1_regs.h > create mode 100644 include/linux/mfd/lochnagar2_regs.h For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx> -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
