On 27-11-18, 09:09, Quentin Perret wrote: > On Tuesday 27 Nov 2018 at 09:27:35 (+0530), Viresh Kumar wrote: > > On 26-11-18, 13:20, Daniel Lezcano wrote: > > > diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt > > > index 84262cd..f53a3c9 100644 > > > --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt > > > +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt > > > @@ -54,6 +54,12 @@ fall back to the default capacity value for every CPU. If cpufreq is not > > > available, final capacities are calculated by directly using capacity-dmips- > > > mhz values (normalized w.r.t. the highest value found while parsing the DT). > > > > > > +If capacity-dmips-mhz is not specified or if the parsing fails, the > > > +default capacity value will be computed against the highest frequency. > > > +When all CPUs have the same OPP, they will have the same capacity > > > +value otherwise the capacity will be scaled down for CPUs having lower > > > +frequencies. > > > > I know you added this based on Quentin's feedback, but I wonder if this is > > really required and if it is improving anything at all. This is what the > > documentation says currently without this patch: > > > > " > > capacity-dmips-mhz is an optional cpu node [1] property: u32 value > > representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the > > maximum frequency available to the cpu is then used to calculate the capacity > > value internally used by the kernel. > > > > capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu > > node, it has to be specified for every other cpu nodes, or the system will > > fall back to the default capacity value for every CPU. If cpufreq is not > > available, final capacities are calculated by directly using capacity-dmips- > > mhz values (normalized w.r.t. the highest value found while parsing the DT). > > " > > > > So it already clearly says two things: > > - If all CPUs don't have this property, we fallback to default capacity for > > every CPU. > > Which is not what we do with this patch any more. We fallback to > scaling with frequency. I read it as that the documentation always said that OS shall do freq based normalization at boot time and we weren't doing the right thing earlier. On partially filled DT we used to fallback to the default capacity but never did the freq based normalization, which was the second step to be done after reading the capacity-dmips-mhz value. Anyway, its fine if all other are in sync to get this included :) -- viresh
