On Sun, Nov 25, 2018 at 10:43:15AM +0300, Mesih Kilinc wrote: > Add compatiple string for Allwinner suniv F1C100s CCU. > Add clock and reset definitions. > > Signed-off-by: Mesih Kilinc <mesihkilinc@xxxxxxxxx> > Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> > --- > .../devicetree/bindings/clock/sunxi-ccu.txt | 1 + > include/dt-bindings/clock/suniv-ccu-f1c100s.h | 69 ++++++++++++++++++++++ > include/dt-bindings/reset/suniv-ccu-f1c100s.h | 37 ++++++++++++ > 3 files changed, 107 insertions(+) > create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h > create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h > > diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > index 47d2e90..e3bd88a 100644 > --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > @@ -22,6 +22,7 @@ Required properties : > - "allwinner,sun50i-h5-ccu" > - "allwinner,sun50i-h6-ccu" > - "allwinner,sun50i-h6-r-ccu" > + - "allwinner,suniv-f1c100s-ccu" > - "nextthing,gr8-ccu" > > - reg: Must contain the registers base address and length > diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h > new file mode 100644 > index 0000000..56f6d0d > --- /dev/null > +++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h > @@ -0,0 +1,69 @@ > +/* > + * Copyright (c) 2018 Icenowy Zheng <icenowy@xxxxxxxx> > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) Goes on 1st line. > + */ > + > +#ifndef _DT_BINDINGS_CLK_SUNIV_F1C100S_H_ > +#define _DT_BINDINGS_CLK_SUNIV_F1C100S_H_ > + > +#define CLK_CPU 11 > + > +#define CLK_BUS_MMC0 14 > +#define CLK_BUS_MMC1 15 > +#define CLK_BUS_DRAM 16 > +#define CLK_BUS_SPI0 17 > +#define CLK_BUS_SPI1 18 > +#define CLK_BUS_OTG 19 > +#define CLK_BUS_VE 20 > +#define CLK_BUS_LCD 21 > +#define CLK_BUS_DEINTERLACE 22 > +#define CLK_BUS_CSI 23 > +#define CLK_BUS_TVD 24 > +#define CLK_BUS_TVE 25 > +#define CLK_BUS_DE_BE 26 > +#define CLK_BUS_DE_FE 27 > +#define CLK_BUS_CODEC 28 > +#define CLK_BUS_SPDIF 29 > +#define CLK_BUS_IR 30 > +#define CLK_BUS_RSB 31 > +#define CLK_BUS_I2S0 32 > +#define CLK_BUS_I2C0 33 > +#define CLK_BUS_I2C1 34 > +#define CLK_BUS_I2C2 35 > +#define CLK_BUS_PIO 36 > +#define CLK_BUS_UART0 37 > +#define CLK_BUS_UART1 38 > +#define CLK_BUS_UART2 39 > + > +#define CLK_MMC0 40 > +#define CLK_MMC0_SAMPLE 41 > +#define CLK_MMC0_OUTPUT 42 > +#define CLK_MMC1 43 > +#define CLK_MMC1_SAMPLE 44 > +#define CLK_MMC1_OUTPUT 45 > +#define CLK_I2S 46 > +#define CLK_SPDIF 47 > + > +#define CLK_USB_PHY0 48 > + > +#define CLK_DRAM_VE 49 > +#define CLK_DRAM_CSI 50 > +#define CLK_DRAM_DEINTERLACE 51 > +#define CLK_DRAM_TVD 52 > +#define CLK_DRAM_DE_FE 53 > +#define CLK_DRAM_DE_BE 54 > + > +#define CLK_DE_BE 55 > +#define CLK_DE_FE 56 > +#define CLK_TCON 57 > +#define CLK_DEINTERLACE 58 > +#define CLK_TVE2_CLK 59 > +#define CLK_TVE1_CLK 60 > +#define CLK_TVD 61 > +#define CLK_CSI 62 > +#define CLK_VE 63 > +#define CLK_CODEC 64 > +#define CLK_AVS 65 > + > +#endif > diff --git a/include/dt-bindings/reset/suniv-ccu-f1c100s.h b/include/dt-bindings/reset/suniv-ccu-f1c100s.h > new file mode 100644 > index 0000000..95f1ed0 > --- /dev/null > +++ b/include/dt-bindings/reset/suniv-ccu-f1c100s.h > @@ -0,0 +1,37 @@ > +/* > + * Copyright (C) 2018 Icenowy Zheng <icenowy@xxxxxxxx> > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) ditto > + */ > + > +#ifndef _DT_BINDINGS_RST_SUNIV_F1C100S_H_ > +#define _DT_BINDINGS_RST_SUNIV_F1C100S_H_ > + > +#define RST_USB_PHY0 0 > +#define RST_BUS_MMC0 1 > +#define RST_BUS_MMC1 2 > +#define RST_BUS_DRAM 3 > +#define RST_BUS_SPI0 4 > +#define RST_BUS_SPI1 5 > +#define RST_BUS_OTG 6 > +#define RST_BUS_VE 7 > +#define RST_BUS_LCD 8 > +#define RST_BUS_DEINTERLACE 9 > +#define RST_BUS_CSI 10 > +#define RST_BUS_TVD 11 > +#define RST_BUS_TVE 12 > +#define RST_BUS_DE_BE 13 > +#define RST_BUS_DE_FE 14 > +#define RST_BUS_CODEC 15 > +#define RST_BUS_SPDIF 16 > +#define RST_BUS_IR 17 > +#define RST_BUS_RSB 18 > +#define RST_BUS_I2S0 19 > +#define RST_BUS_I2C0 20 > +#define RST_BUS_I2C1 21 > +#define RST_BUS_I2C2 22 > +#define RST_BUS_UART0 23 > +#define RST_BUS_UART1 24 > +#define RST_BUS_UART2 25 > + > +#endif /* _DT_BINDINGS_RST_SUNIV_F1C100S_H_ */ > -- > 2.7.4 >
