Re: [PATCH] arm64: dts: qcom: qcs404: Add WCN3990 WLAN module device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vinod,

Thanks for the review.

On 2018-11-26 20:14, Vinod Koul wrote:
Hi Govind,

On 26-11-18, 19:51, Govind Singh wrote:
Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on qcs404 soc.
Optional clock and regulator controls are not yet available in
upstream, hence add them once available.

Signed-off-by: Govind Singh <govinds@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9ca4f061ecc5..1a401a32d4a1 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -958,6 +958,25 @@
 				status = "disabled";
 			};
 		};
+
+		wifi: wifi@0A000000 {

Please remove leading 0 from node


Sure, i will change in v2.

+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0A000000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};

 	timer {

This file is sorted alphabetically and reg values. So this should be
between blsp1_uart2 and intc node, can you please change that

Also please compile this with W=12


Sure, i will change in v2.

Lastly, I am not sure, but should the wifi node be always enabled?
Should it not be enabled in the board dts file? Bjorn..?


yes, i some how missed this.
I will mark the status disabled by default and enable from qcs404 evb dts.

Thanks



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux