On Fri, Nov 16, 2018 at 7:02 PM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
>
> Each CPU can (and does) participate in cooling down the system but the
> DT only captures a handful of them, normally CPU0, in the cooling maps.
> Things work by chance currently as under normal circumstances its the
> first CPU of each cluster which is used by the operating systems to
> probe the cooling devices. But as soon as this CPU ordering changes and
> any other CPU is used to bring up the cooling device, we will start
> seeing failures.
>
> Also the DT is rather incomplete when we list only one CPU in the
> cooling maps, as the hardware doesn't have any such limitations.
>
> Update cooling maps to include all devices affected by individual trip
> points.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Applied to linux-uniphier.
Thanks.
> ---
> arch/arm/boot/dts/uniphier-pxs2.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> index 8d20e9548e39..06a049f6edf8 100644
> --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> @@ -141,8 +141,10 @@
> cooling-maps {
> map {
> trip = <&cpu_alert>;
> - cooling-device = <&cpu0
> - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
> --
> 2.19.1.568.g152ad8e3369a
>
--
Best Regards
Masahiro Yamada
