This patch series add support for external interrupt controller in Actions Semi Owl famil of SoC's (S500, S700 and S900). Actions provides support for external interrupt controller to be connected with it's SoC's using 3 SIRQ pins. Each line can be configures independently, i.e 3 independent external interrupt controller can be connected and managed parallely. Device tree node is created only for S700 after testing it in Cubieboard7. Changelog in v3: - Set default operating frequency to 24MHz - Falling edge and Low Level interrupts translated to rising edge and high level - Introduced common function with lock handling for register read and write - Used direct GIC interrupt number for interrupt local hwirq and finding offset using DT entry (range) when registers are shared - Changed irq_ack to irq_eoi - Added translation method for irq_domain_ops - Clearing interrupt pending based on bitmask for edge triggered - Added pinctrl definition for sirq for cubieboard7. This depends on, https://lore.kernel.org/patchwork/patch/1012859/ Changelog in v2: - Added SIRQ as hierarchical chip GIC <----> SIRQ <----> External interrupt controller/Child devices - Device binding updates with vendor prefix - Register sharing handled globally and common init sequence/data for all actions SoC family Thanks, Parthiban Saravanan Parthiban Nallathambi (4): dt-bindings: interrupt-controller: Actions external interrupt controller drivers/irqchip: Add Actions external interrupts support arm64: dts: actions: Add sirq node for Actions Semi S700 arm64: dts: actions: s700-cubieboard7: Enable SIRQ .../interrupt-controller/actions,owl-sirq.txt | 57 ++++ .../boot/dts/actions/s700-cubieboard7.dts | 19 ++ arch/arm64/boot/dts/actions/s700.dtsi | 10 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-owl-sirq.c | 301 ++++++++++++++++++ 5 files changed, 388 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt create mode 100644 drivers/irqchip/irq-owl-sirq.c -- 2.17.2
