Hi Anand,
CLK_DOUT_ACLK_G3D is the clock for GPU h/w and it requires the buck4_reg("vdd_g3d").
bus_wcore uses the buck3_reg("vdd_int"). bus_wcore and bus_g3d don't share the
same voltage line. It is wrong to make 'bus_g3d' as the child of 'bus_wcore'
because of using the different regulator.
CLK_DOUT_ACLK_G3D and buck4_reg should be controlled from MALI driver
with DEVFREQ framework. Unfortunately, MALI driver is not posted to mainline.
On 2018년 11월 23일 18:44, Anand Moon wrote:
> Add missing Netwwork on chip for g3d bus node using VDD_INI
> for Exynos542x SoC.
>
> - CLK_DOUT_ACLK_G3D for G3D's AXI
>
> Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 57 +++++++++++++++++--
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 5 ++
> 2 files changed, 56 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index aaff15880761..bc7203bb1282 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -1047,6 +1047,14 @@
> status = "disabled";
> };
>
> + bus_g3d: bus_g3d {
> + compatible = "samsung,exynos-bus";
> + clocks = <&clock CLK_DOUT_ACLK_G3D>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_g3d_opp_table>;
> + status = "disabled";
> + };
> +
> bus_jpeg: bus_jpeg {
> compatible = "samsung,exynos-bus";
> clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
> @@ -1245,7 +1253,44 @@
> };
> };
>
> - bus_jpeg_opp_table: opp_table11 {
> + bus_g3d_opp_table: opp_table11 {
> + compatible = "operating-points-v2";
> +
> + opp@600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <1025000>;
> + };
> + opp@543000000 {
> + opp-hz = /bits/ 64 <543000000>;
> + opp-microvolt = <987500>;
> + };
> + opp@480000000 {
> + opp-hz = /bits/ 64 <480000000>;
> + opp-microvolt = <950000>;
> + };
> + opp@420000000 {
> + opp-hz = /bits/ 64 <420000000>;
> + opp-microvolt = <937500>;
> + };
> + opp@350000000 {
> + opp-hz = /bits/ 64 <350000000>;
> + opp-microvolt = <900000>;
> + };
> + opp@266000000 {
> + opp-hz = /bits/ 64 <266000000>;
> + opp-microvolt = <862500>;
> + };
> + opp@177000000 {
> + opp-hz = /bits/ 64 <177000000>;
> + opp-microvolt = <862500>;
> + };
> + opp@100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + opp-microvolt = <862500>;
> + };
> + };
> +
> + bus_jpeg_opp_table: opp_table12 {
> compatible = "operating-points-v2";
>
> opp00 {
> @@ -1262,7 +1307,7 @@
> };
> };
>
> - bus_jpeg_apb_opp_table: opp_table12 {
> + bus_jpeg_apb_opp_table: opp_table13 {
> compatible = "operating-points-v2";
>
> opp00 {
> @@ -1279,7 +1324,7 @@
> };
> };
>
> - bus_disp1_fimd_opp_table: opp_table13 {
> + bus_disp1_fimd_opp_table: opp_table14 {
> compatible = "operating-points-v2";
>
> opp00 {
> @@ -1290,7 +1335,7 @@
> };
> };
>
> - bus_disp1_opp_table: opp_table14 {
> + bus_disp1_opp_table: opp_table15 {
> compatible = "operating-points-v2";
>
> opp00 {
> @@ -1304,7 +1349,7 @@
> };
> };
>
> - bus_gscl_opp_table: opp_table15 {
> + bus_gscl_opp_table: opp_table16 {
> compatible = "operating-points-v2";
>
> opp00 {
> @@ -1318,7 +1363,7 @@
> };
> };
>
> - bus_mscl_opp_table: opp_table16 {
> + bus_mscl_opp_table: opp_table17 {
> compatible = "operating-points-v2";
>
> opp00 {
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index 2fac4baf1eb4..6e39e4594502 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -89,6 +89,11 @@
> status = "okay";
> };
>
> +&bus_g3d {
> + devfreq = <&bus_wcore>;
> + status = "okay";
> +};
> +
> &bus_jpeg {
> devfreq = <&bus_wcore>;
> status = "okay";
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
