Hi Heiko,
On Tue, Oct 16, 2018 at 10:09 AM Heiko Stuebner <heiko@xxxxxxxxx> wrote:
> Am Dienstag, 9. Oktober 2018, 23:36:56 CEST schrieb Otavio Salvador:
> > Enable eMMC support for rv1108 evaluation board.
> >
> > Signed-off-by: Otavio Salvador <otavio@xxxxxxxxxxxxxxxx>
> > ---
> >
> > arch/arm/boot/dts/rv1108-evb.dts | 8 ++++++++
> > arch/arm/boot/dts/rv1108.dtsi | 29 +++++++++++++++++++++++++++++
> > 2 files changed, 37 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
> > index 70f0106d1252..f3c6f52c49e6 100644
> > --- a/arch/arm/boot/dts/rv1108-evb.dts
> > +++ b/arch/arm/boot/dts/rv1108-evb.dts
> > @@ -226,6 +226,14 @@
> > status = "okay";
> > };
> >
> > +&emmc {
> > + cap-mmc-highspeed;
> > + supports-emmc;
> > + non-removable;
> > + num-slots = <1>;
>
> num-slots should not be present anymore on new additions
>
> Also missing the pinctrl settings you're defining below?
> Aka pinctrl-0 = <&emmc_*>; + pinctrl-names = "default"
Thank you, I am preparing a v2 of this patch together with few more changes.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
