Document support for the Watchdog Timer (WDT) Controller in the
Qualcomm PM8916 PMIC module.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
v2: Add interrupts and timeout-sec props
v3: Reword props summary
.../bindings/watchdog/qcom,pm8916-wdt.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
new file mode 100644
index 0000000..6fb984f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
@@ -0,0 +1,28 @@
+QCOM PM8916 watchdog timer controller
+
+This pm8916 watchdog timer controller must be under pm8916-pon node.
+
+Required properties:
+- compatible: should be "qcom,pm8916-wdt"
+
+Optional properties :
+- interrupts : Watchdog pre-timeout (bark) interrupt.
+- timeout-sec : Watchdog timeout value in seconds.
+
+Example:
+
+ pm8916_0: pm8916@0 {
+ compatible = "qcom,pm8916", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x800>;
+
+ watchdog {
+ compatible = "qcom,pm8916-wdt";
+ interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+ timeout-sec = <10>;
+ };
+ };
+ };
--
2.7.4
