Hello,
This series adds a new driver to support Armada 3700 COMPHY IP.
The series has been tested on an ESPRESSObin with SATA, PCIe
and USB3 host. For this purpose, patch 1 enumerates the SATA PHY
mode. The SGMII PHY mode that is supported by the IP has been written
(uses SMC calls anyway) but could not be tested on this platform.
Three series will follow to add PHY support (or at least a PHY nodes
in the A3700/ESPRESSObin device trees) to the MVEBU AHCI driver, the
Aardvark PCI controller driver and the MVEBU xHCI driver. All this is
needed in order to achieve suspend to RAM on this platform.
Thanks,
Miquèl
Miquel Raynal (6):
phy: enumerate SATA PHY mode
phy: add A3700 COMPHY support
dt-bindings: phy: mvebu-comphy: extend the file to describe a3700
bindings
MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver
ARM64: dts: marvell: armada-37xx: fix SATA node scope
ARM64: dts: marvell: armada-37xx: declare the COMPHY node
.../bindings/phy/phy-mvebu-comphy.txt | 65 ++++-
MAINTAINERS | 6 +
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +-
drivers/phy/marvell/Kconfig | 10 +
drivers/phy/marvell/Makefile | 1 +
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 276 ++++++++++++++++++
include/linux/phy/phy.h | 1 +
7 files changed, 377 insertions(+), 13 deletions(-)
create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c
--
2.19.1
