>
> On Thu, Oct 18, 2018 at 09:45:04AM +0200, Frieder Schrempf wrote:
> > Some SOCs in the i.MX6 family have a USB host controller that is only
> > capable of the HSIC interface and has no on-board PHY.
> >
> > To be able to use these controllers, we need to add "usb-nop-xceiv"
> > dummy PHYs.
> >
> > Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>
> @Peter, looks good to you?
>
> Shawn
>
> > ---
> > arch/arm/boot/dts/imx6qdl.dtsi | 14 ++++++++++++++
> > arch/arm/boot/dts/imx6sl.dtsi | 7 +++++++
> > arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++
> > 3 files changed, 27 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi
> > b/arch/arm/boot/dts/imx6qdl.dtsi index 61d2d26..d3404d1 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -139,6 +139,16 @@
> > interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
> > };
> >
> > + usbphynop1: usbphynop1 {
> > + compatible = "usb-nop-xceiv";
> > + #phy-cells = <0>;
> > + };
> > +
Why #phy-cells property is needed? Others are ok for me.
Peter
> > + usbphynop2: usbphynop2 {
> > + compatible = "usb-nop-xceiv";
> > + #phy-cells = <0>;
> > + };
> > +
> > soc {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > @@ -981,6 +991,8 @@
> > reg = <0x02184400 0x200>;
> > interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clks IMX6QDL_CLK_USBOH3>;
> > + fsl,usbphy = <&usbphynop1>;
> > + phy_type = "hsic";
> > fsl,usbmisc = <&usbmisc 2>;
> > dr_mode = "host";
> > ahb-burst-config = <0x0>;
> > @@ -994,6 +1006,8 @@
> > reg = <0x02184600 0x200>;
> > interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clks IMX6QDL_CLK_USBOH3>;
> > + fsl,usbphy = <&usbphynop2>;
> > + phy_type = "hsic";
> > fsl,usbmisc = <&usbmisc 3>;
> > dr_mode = "host";
> > ahb-burst-config = <0x0>;
> > diff --git a/arch/arm/boot/dts/imx6sl.dtsi
> > b/arch/arm/boot/dts/imx6sl.dtsi index 7a4f5da..81edcdc 100644
> > --- a/arch/arm/boot/dts/imx6sl.dtsi
> > +++ b/arch/arm/boot/dts/imx6sl.dtsi
> > @@ -110,6 +110,11 @@
> > interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
> > };
> >
> > + usbphynop1: usbphynop1 {
> > + compatible = "usb-nop-xceiv";
> > + #phy-cells = <0>;
> > + };
> > +
> > soc {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > @@ -815,6 +820,8 @@
> > reg = <0x02184400 0x200>;
> > interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clks IMX6SL_CLK_USBOH3>;
> > + fsl,usbphy = <&usbphynop1>;
> > + phy_type = "hsic";
> > fsl,usbmisc = <&usbmisc 2>;
> > dr_mode = "host";
> > ahb-burst-config = <0x0>;
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi
> > b/arch/arm/boot/dts/imx6sx.dtsi index 844caa3..07ed417 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -159,6 +159,11 @@
> > interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > };
> >
> > + usbphynop1: usbphynop1 {
> > + compatible = "usb-nop-xceiv";
> > + #phy-cells = <0>;
> > + };
> > +
> > soc {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > @@ -877,6 +882,7 @@
> > reg = <0x02184400 0x200>;
> > interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clks IMX6SX_CLK_USBOH3>;
> > + fsl,usbphy = <&usbphynop1>;
> > fsl,usbmisc = <&usbmisc 2>;
> > phy_type = "hsic";
> > fsl,anatop = <&anatop>;
> > --
> > 2.7.4
> >
