On 13 March 2014 06:28, Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> wrote: > On 03/13/2014 12:16 AM, Rahul Sharma wrote: >> >> The patch adds the dts files for exynos5260. >> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> >> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> >> Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> >> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> >> --- >> arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 >> +++++++++++++++++++++++++++++ >> arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++ >> 2 files changed, 974 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> create mode 100644 arch/arm/boot/dts/exynos5260.dtsi >> >> diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> new file mode 100644 >> index 0000000..f6ee55e >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> @@ -0,0 +1,574 @@ >> +/* >> + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as >> device >> + * tree nodes are listed in this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#define PIN_PULL_NONE 0 >> +#define PIN_PULL_DOWN 1 >> +#define PIN_PULL_UP 3 >> + >> +&pinctrl_0 { >> + gpa0: gpa0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa1: gpa1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa2: gpa2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb0: gpb0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb1: gpb1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb2: gpb2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb3: gpb3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb4: gpb4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb5: gpb5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd0: gpd0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd1: gpd1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd2: gpd2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpe0: gpe0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpe1: gpe1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf0: gpf0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf1: gpf1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpk0: gpk0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx0: gpx0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx1: gpx1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx2: gpx2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx3: gpx3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + uart0_data: uart0-data { >> + samsung,pins = "gpa0-0", "gpa0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart0_fctl: uart0-fctl { >> + samsung,pins = "gpa0-2", "gpa0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_data: uart1-data { >> + samsung,pins = "gpa1-0", "gpa1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_fctl: uart1-fctl { >> + samsung,pins = "gpa1-2", "gpa1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart2_data: uart2-data { >> + samsung,pins = "gpa1-4", "gpa1-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi0_bus: spi0-bus { >> + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi1_bus: spi1-bus { >> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + usb3_vbus0_en: usb3-vbus0-en { >> + samsung,pins = "gpa2-4"; >> + samsung,pin-function = <1>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s1_bus: i2s1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm1_bus: pcm1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spdif1_bus: spdif1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi2_bus: spi2-bus { >> + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c0_hs_bus: i2c0-hs-bus { >> + samsung,pins = "gpb3-0", "gpb3-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c1_hs_bus: i2c1-hs-bus { >> + samsung,pins = "gpb3-2", "gpb3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c2_hs_bus: i2c2-hs-bus { >> + samsung,pins = "gpb3-4", "gpb3-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c3_hs_bus: i2c3-hs-bus { >> + samsung,pins = "gpb3-6", "gpb3-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c4_bus: i2c4-bus { >> + samsung,pins = "gpb4-0", "gpb4-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c5_bus: i2c5-bus { >> + samsung,pins = "gpb4-2", "gpb4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c6_bus: i2c6-bus { >> + samsung,pins = "gpb4-4", "gpb4-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c7_bus: i2c7-bus { >> + samsung,pins = "gpb4-6", "gpb4-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c8_bus: i2c8-bus { >> + samsung,pins = "gpb5-0", "gpb5-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c9_bus: i2c9-bus { >> + samsung,pins = "gpb5-2", "gpb5-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c10_bus: i2c10-bus { >> + samsung,pins = "gpb5-4", "gpb5-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c11_bus: i2c11-bus { >> + samsung,pins = "gpb5-6", "gpb5-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_gpio_a: cam-gpio-a { >> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", >> + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", >> + "gpe1-0", "gpe1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_gpio_b: cam-gpio-b { >> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", >> + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c1_bus: cam-i2c1-bus { >> + samsung,pins = "gpf0-2", "gpf0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c0_bus: cam-i2c0-bus { >> + samsung,pins = "gpf0-0", "gpf0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_spi0_bus: cam-spi0-bus { >> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_spi1_bus: cam-spi1-bus { >> + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> +}; >> + >> +&pinctrl_1 { >> + gpc0: gpc0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc1: gpc1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc2: gpc2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc3: gpc3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc4: gpc4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + sd0_clk: sd0-clk { >> + samsung,pins = "gpc0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cmd: sd0-cmd { >> + samsung,pins = "gpc0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus1: sd0-bus-width1 { >> + samsung,pins = "gpc0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus4: sd0-bus-width4 { >> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus8: sd0-bus-width8 { >> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_rdqs: sd0-rdqs { >> + samsung,pins = "gpc0-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_clk: sd1-clk { >> + samsung,pins = "gpc1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cmd: sd1-cmd { >> + samsung,pins = "gpc1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus1: sd1-bus-width1 { >> + samsung,pins = "gpc1-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus4: sd1-bus-width4 { >> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus8: sd1-bus-width8 { >> + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_clk: sd2-clk { >> + samsung,pins = "gpc2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cmd: sd2-cmd { >> + samsung,pins = "gpc2-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cd: sd2-cd { >> + samsung,pins = "gpc2-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus1: sd2-bus-width1 { >> + samsung,pins = "gpc2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus4: sd2-bus-width4 { >> + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> +}; >> + >> +&pinctrl_2 { >> + gpz0: gpz0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpz1: gpz1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> diff --git a/arch/arm/boot/dts/exynos5260.dtsi >> b/arch/arm/boot/dts/exynos5260.dtsi >> new file mode 100644 >> index 0000000..a99ef77 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5260.dtsi >> @@ -0,0 +1,400 @@ >> +/* >> + * SAMSUNG EXYNOS5260 SoC device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#include "skeleton.dtsi" >> + >> +#include <dt-bindings/clock/exynos5260-clk.h> >> + >> +/ { >> + compatible = "samsung,exynos5260"; >> + interrupt-parent = <&gic>; >> + >> + aliases { >> + pinctrl0 = &pinctrl_0; >> + pinctrl1 = &pinctrl_1; >> + pinctrl2 = &pinctrl_2; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x0>; >> + cci-control-port = <&cci_control1>; >> + }; >> + >> + cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x1>; >> + cci-control-port = <&cci_control1>; >> + }; >> + >> + cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x100>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@101 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x101>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@102 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x102>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@103 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x103>; >> + cci-control-port = <&cci_control0>; >> + }; >> + }; >> + >> + soc: soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + clock_top: clock-controller@10010000 { >> + compatible = "samsung,exynos5260-clock-top"; >> + reg = <0x10010000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_peri: clock-controller@10200000 { >> + compatible = "samsung,exynos5260-clock-peri"; >> + reg = <0x10200000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_egl: clock-controller@10600000 { >> + compatible = "samsung,exynos5260-clock-egl"; >> + reg = <0x10600000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_kfc: clock-controller@10700000 { >> + compatible = "samsung,exynos5260-clock-kfc"; >> + reg = <0x10700000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_g2d: clock-controller@10A00000 { >> + compatible = "samsung,exynos5260-clock-g2d"; >> + reg = <0x10A00000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_mif: clock-controller@10CE0000 { >> + compatible = "samsung,exynos5260-clock-mif"; >> + reg = <0x10CE0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_mfc: clock-controller@11090000 { >> + compatible = "samsung,exynos5260-clock-mfc"; >> + reg = <0x11090000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_g3d: clock-controller@11830000 { >> + compatible = "samsung,exynos5260-clock-g3d"; >> + reg = <0x11830000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_fsys: clock-controller@122E0000 { >> + compatible = "samsung,exynos5260-clock-fsys"; >> + reg = <0x122E0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_aud: clock-controller@128C0000 { >> + compatible = "samsung,exynos5260-clock-aud"; >> + reg = <0x128C0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_isp: clock-controller@133C0000 { >> + compatible = "samsung,exynos5260-clock-isp"; >> + reg = <0x133C0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_gscl: clock-controller@13F00000 { >> + compatible = "samsung,exynos5260-clock-gscl"; >> + reg = <0x13F00000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_disp: clock-controller@14550000 { >> + compatible = "samsung,exynos5260-clock-disp"; >> + reg = <0x14550000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clocks { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; > > > Even though you added #address-cells property I can not see "reg" property > in any of "fixed-clock". > Isn't it better either we can remove this or add "reg" property? > Also all these fixed-clock are missing #clock-cells property. > Since it is a soc level addition, I enabled provision for adding reg property for fixed clocks in boards files (or in SoC file). Regards, Rahul Sharma. >> + >> + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch0_txd_clk"; >> + }; >> + >> + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch1_txd_clk"; >> + }; >> + >> + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch2_txd_clk"; >> + }; >> + >> + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch3_txd_clk"; >> + }; >> + >> + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko { >> + compatible = "fixed-clock"; >> + clock-frequency = <250000000>; >> + clock-output-names = >> "phyclk_hdmi_phy_tmds_clko"; >> + }; >> + >> + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko { >> + compatible = "fixed-clock"; >> + clock-frequency = <166000000>; >> + clock-output-names = >> "phyclk_hdmi_phy_pixel_clko"; >> + }; >> + >> + hdmi_link_tmds_clkhi: >> phyclk_hdmi_link_o_tmds_clkhi { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = >> "phyclk_hdmi_link_o_tmds_clkhi"; >> + }; >> + >> + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m { >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + clock-output-names = >> "phyclk_dptx_phy_o_ref_clk_24m"; >> + }; >> + >> + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 { >> + compatible = "fixed-clock"; >> + clock-frequency = <135000000>; >> + clock-output-names = >> "phyclk_dptx_phy_clk_div2"; >> + }; >> + >> + mipi_dphy_rxclkesc0: >> phyclk_mipi_dphy_4l_m_rxclkesc0 { >> + compatible = "fixed-clock"; >> + clock-frequency = <20000000>; >> + clock-output-names = >> "phyclk_mipi_dphy_4l_m_rxclkesc0"; >> + }; >> + >> + usbhost20_phy_phyclock: >> phyclk_usbhost20_phy_phyclock { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_phyclock"; >> + }; >> + >> + usbhost20_phy_freeclk: >> phyclk_usbhost20_phy_freeclk { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_freeclk"; >> + }; >> + >> + usbhost20_phy_clk48mohci: >> phyclk_usbhost20_phy_clk48mohci { >> + compatible = "fixed-clock"; >> + clock-frequency = <48000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_clk48mohci"; >> + }; >> + >> + usbdrd30_pipe_pclk: >> phyclk_usbdrd30_udrd30_pipe_pclk { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = >> "phyclk_usbdrd30_udrd30_pipe_pclk"; >> + }; >> + >> + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock >> { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbdrd30_udrd30_phyclock"; >> + }; >> + }; >> + >> + gic: interrupt-controller@10481000 { >> + compatible = "arm,cortex-a15-gic", >> "arm,cortex-a9-gic"; >> + #interrupt-cells = <3>; >> + #address-cells = <0>; >> + #size-cells = <0>; >> + interrupt-controller; >> + reg = <0x10481000 0x1000>, >> + <0x10482000 0x1000>, >> + <0x10484000 0x2000>, >> + <0x10486000 0x2000>; >> + interrupts = <1 9 0xf04>; >> + }; >> + >> + chipid: chipid@10000000 { >> + compatible = "samsung,exynos4210-chipid"; >> + reg = <0x10000000 0x100>; >> + }; >> + >> + mct: mct@100B0000 { >> + compatible = "samsung,exynos4210-mct"; >> + reg = <0x100B0000 0x1000>; >> + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; >> + clock-names = "fin_pll", "mct"; >> + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, >> + <0 107 0>, <0 122 0>, <0 123 0>, >> + <0 124 0>, <0 125 0>, <0 126 0>, >> + <0 127 0>, <0 128 0>, <0 129 0>; >> + }; >> + >> + cci: cci@10F00000 { >> + compatible = "arm,cci-400"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <0x10F00000 0x1000>; >> + ranges = <0x0 0x10F00000 0x6000>; >> + >> + cci_control0: slave-if@4000 { >> + compatible = "arm,cci-400-ctrl-if"; >> + interface-type = "ace"; >> + reg = <0x4000 0x1000>; >> + }; >> + >> + cci_control1: slave-if@5000 { >> + compatible = "arm,cci-400-ctrl-if"; >> + interface-type = "ace"; >> + reg = <0x5000 0x1000>; >> + }; >> + }; >> + >> + pinctrl_0: pinctrl@11600000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x11600000 0x1000>; >> + interrupts = <0 79 0>; >> + >> + wakeup-interrupt-controller { >> + compatible = >> "samsung,exynos4210-wakeup-eint"; >> + interrupt-parent = <&gic>; >> + interrupts = <0 32 0>; >> + }; >> + }; >> + >> + pinctrl_1: pinctrl@12290000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x12290000 0x1000>; >> + interrupts = <0 157 0>; >> + }; >> + >> + pinctrl_2: pinctrl@128B0000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x128B0000 0x1000>; >> + interrupts = <0 243 0>; >> + }; >> + >> + uart0: serial@12C00000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C00000 0x100>; >> + interrupts = <0 146 0>; >> + clocks = <&clock_peri PERI_CLK_UART0>, >> <&clock_peri PERI_SCLK_UART0>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart1: serial@12C10000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C10000 0x100>; >> + interrupts = <0 147 0>; >> + clocks = <&clock_peri PERI_CLK_UART1>, >> <&clock_peri PERI_SCLK_UART1>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart2: serial@12C20000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C20000 0x100>; >> + interrupts = <0 148 0>; >> + clocks = <&clock_peri PERI_CLK_UART2>, >> <&clock_peri PERI_SCLK_UART2>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart3: serial@12860000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12860000 0x100>; >> + interrupts = <0 145 0>; >> + clocks = <&clock_aud AUD_CLK_AUD_UART>, >> <&clock_aud AUD_SCLK_AUD_UART>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + mmc_0: mmc0@12140000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12140000 0x2000>; >> + interrupts = <0 156 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top >> TOP_SCLK_MMC0>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + >> + mmc_1: mmc1@12150000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12150000 0x2000>; >> + interrupts = <0 158 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top >> TOP_SCLK_MMC1>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + >> + mmc_2: mmc2@12160000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12160000 0x2000>; >> + interrupts = <0 159 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top >> TOP_SCLK_MMC2>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + }; >> +}; >> + >> +#include "exynos5260-pinctrl.dtsi" > > > > -- > Best Regards, > Pankaj Dubey > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
