Hi Rahul, On 03/12/2014 11:56 PM, Rahul Sharma wrote:
Add support for pll2650xx in samsung pll file. This PLL variant is close to pll36xx but uses CON2 registers instead of CON1. Aud_pll in Exynos5260 is pll2650xx and uses this code. Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> --- drivers/clk/samsung/clk-pll.c | 101 +++++++++++++++++++++++++++++++++++++++++ drivers/clk/samsung/clk-pll.h | 1 + 2 files changed, 102 insertions(+) diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 18e42ef..b07fad2 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -1049,6 +1049,101 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = { .recalc_rate = samsung_pll2550xx_recalc_rate, };+/*+ * PLL2650XX Clock Type + */ + +/* Maximum lock time can be 3000 * PDIV cycles */ +#define PLL2650XX_LOCK_FACTOR 3000 + +#define PLL2650XX_MDIV_SHIFT 9 +#define PLL2650XX_PDIV_SHIFT 3 +#define PLL2650XX_SDIV_SHIFT 0 +#define PLL2650XX_KDIV_SHIFT 0 +#define PLL2650XX_MDIV_MASK 0x1ff +#define PLL2650XX_PDIV_MASK 0x3f +#define PLL2650XX_SDIV_MASK 0x7 +#define PLL2650XX_KDIV_MASK 0xffff +#define PLL2650XX_PLL_ENABLE_SHIFT 23 +#define PLL2650XX_PLL_LOCKTIME_SHIFT 21 +#define PLL2650XX_PLL_FOUTMASK_SHIFT 31 + +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; + s16 kdiv; + u64 fvco = parent_rate; + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; + kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); + + fvco *= (mdiv << 16) + kdiv; + do_div(fvco, (pdiv << sdiv)); + fvco >>= 16; + + return (unsigned long)fvco; +} + +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 tmp, pll_con0, pll_con2; + const struct samsung_pll_rate_table *rate; + + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + pll_con0 = __raw_readl(pll->con_reg); + pll_con2 = __raw_readl(pll->con_reg + 8); + + /* Change PLL PMS values */ + pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | + PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | + PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); + pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; + pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; + pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; + pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; + + pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); + pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) + << PLL2650XX_KDIV_SHIFT; + + /* Set PLL lock time. */ + __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); + + __raw_writel(pll_con0, pll->con_reg); + __raw_writel(pll_con2, pll->con_reg + 8); + + do { + tmp = __raw_readl(pll->con_reg); + } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT))); + + return 0; +} + +static const struct clk_ops samsung_pll2650xx_clk_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, + .set_rate = samsung_pll2650xx_set_rate, + .round_rate = samsung_pll_round_rate, +}; + +static const struct clk_ops samsung_pll2650xx_clk_min_ops = { + .recalc_rate = samsung_pll2650xx_recalc_rate, +}; + static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, struct samsung_pll_clock *pll_clk, void __iomem *base) @@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, else init.ops = &samsung_pll2550xx_clk_ops; break; + case pll_2650xx: + if (!pll->rate_table) + init.ops = &samsung_pll2650xx_clk_min_ops; + else + init.ops = &samsung_pll2650xx_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index ec4bc1d..c0ed4d4 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -32,6 +32,7 @@ enum samsung_pll_type { pll_s3c2410_upll, pll_s3c2440_mpll, pll_2550xx, + pll_2650xx, };#define PLL_35XX_RATE(_rate, _m, _p, _s) \
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung,com <mailto:t.figa@xxxxxxxxxxx>> -- Best Regards, Pankaj Dubey -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
