Hi Joe, On Wed, Mar 12, 2014 at 3:42 PM, Joe Perches <joe@xxxxxxxxxxx> wrote: > On Wed, 2014-03-12 at 15:15 -0500, Vince Bridgers wrote: >> This patch adds the main driver and header file for the Altera Triple >> Speed Ethernet driver. > [] >> diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h > [] >> +/* MAC register Space. Note that some of these registers may or may not be >> + * present depending upon options chosen by the user when the core was >> + * configured and built. Please consult the Altera Triple Speed Ethernet User >> + * Guide for details. >> + */ >> +struct altera_tse_mac { >> + /* Bits 15:0: MegaCore function revision (0x0800). Bit 31:16: Customer >> + * specific revision >> + */ >> + unsigned int megacore_revision; >> + /* Provides a memory location for user applications to test the device >> + * memory operation. >> + */ >> + unsigned int scratch_pad; >> + /* The host processor uses this register to control and configure the >> + * MAC block >> + */ >> + unsigned int command_config; >> + /* 32-bit primary MAC address word 0 bits 0 to 31 of the primary >> + * MAC address >> + */ >> + unsigned int mac_addr_0; >> + /* 32-bit primary MAC address word 1 bits 32 to 47 of the primary >> + * MAC address >> + */ > > maybe all of these should be specifically sized using u32 like > > u32 mac_addr_0; > > yes, I agree - that would be better. I'll pick this up in V5. Cheers, Vince -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html