RE: [PATCH 1/2 v3] powerpc/fsl: Use new clockgen binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Scott,

Any comments on this patch set?

BR,
Andy

> -----Original Message-----
> From: Yuantian Tang <andy.tang@xxxxxxx>
> Sent: 2018年10月31日 14:58
> To: oss@xxxxxxxxxxxx
> Cc: mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; benh@xxxxxxxxxxxxxxxxxxx; paulus@xxxxxxxxx;
> mpe@xxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linuxppc-dev@xxxxxxxxxxxxxxxx; Andy Tang <andy.tang@xxxxxxx>
> Subject: [PATCH 1/2 v3] powerpc/fsl: Use new clockgen binding
> 
> From: Scott Wood <oss@xxxxxxxxxxxx>
> 
> The driver retains compatibility with old device trees, but we don't want
> the old nodes lying around to be copied, or used as a reference (some of
> the mux options are incorrect), or even just being clutter.
> 
> Signed-off-by: Scott Wood <oss@xxxxxxxxxxxx>
> Signed-off-by: Tang Yuantian <andy.tang@xxxxxxx>
> ---
> v3:
>   - update the commit message
>   - split the dts and driver to different patchset
> 
>  arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi     |    4 +-
>  arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/b4si-post.dtsi       |   15 -----
>  arch/powerpc/boot/dts/fsl/p2041si-post.dtsi    |   18 ------
>  arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/p3041si-post.dtsi    |   18 ------
>  arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/p4080si-post.dtsi    |   70
> ------------------------
>  arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi     |   16 +++---
>  arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi     |    4 +-
>  arch/powerpc/boot/dts/fsl/p5040si-post.dtsi    |   18 ------
>  arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi |   55 +++----------------
>  arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi |   38 +++----------
>  arch/powerpc/boot/dts/fsl/t1023si-post.dtsi    |   16 ------
>  arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi     |    4 +-
>  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi    |   44 ---------------
>  arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/t2081si-post.dtsi    |   22 --------
>  arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi     |    8 ++--
>  arch/powerpc/boot/dts/fsl/t4240si-post.dtsi    |   61 ---------------------
>  arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi     |   24 ++++----
>  22 files changed, 66 insertions(+), 409 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> index 88d8423..bb7b9b9 100644
> --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> @@ -70,14 +70,14 @@
>  		cpu0: PowerPC,e6500@0 {
>  			device_type = "cpu";
>  			reg = <0 1>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu1: PowerPC,e6500@2 {
>  			device_type = "cpu";
>  			reg = <2 3>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
> diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> index f3f968c..388ba1b 100644
> --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> @@ -75,28 +75,28 @@
>  		cpu0: PowerPC,e6500@0 {
>  			device_type = "cpu";
>  			reg = <0 1>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu1: PowerPC,e6500@2 {
>  			device_type = "cpu";
>  			reg = <2 3>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu2: PowerPC,e6500@4 {
>  			device_type = "cpu";
>  			reg = <4 5>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu3: PowerPC,e6500@6 {
>  			device_type = "cpu";
>  			reg = <6 7>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
> diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> index 1b33f51..4f044b4 100644
> --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> @@ -398,21 +398,6 @@
>  	};
> 
>  /include/ "qoriq-clockgen2.dtsi"
> -	clockgen: global-utilities@e1000 {
> -		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
> -		reg = <0xe1000 0x1000>;
> -
> -		mux0: mux0@0 {
> -			#clock-cells = <0>;
> -			reg = <0x0 0x4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				<&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll0-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux0";
> -		};
> -	};
> 
>  	rcpm: global-utilities@e2000 {
>  		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0"; diff --git
> a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
> index 51e975d..872e448 100644
> --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
> @@ -327,24 +327,6 @@
>  /include/ "qoriq-clockgen1.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux2";
> -		};
> -
> -		mux3: mux3@60 {
> -			#clock-cells = <0>;
> -			reg = <0x60 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux3";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
> index 941274c..6318962 100644
> --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
> @@ -89,7 +89,7 @@
>  		cpu0: PowerPC,e500mc@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_0>;
>  			fsl,portid-mapping = <0x80000000>;
>  			L2_0: l2-cache {
> @@ -99,7 +99,7 @@
>  		cpu1: PowerPC,e500mc@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x40000000>;
>  			L2_1: l2-cache {
> @@ -109,7 +109,7 @@
>  		cpu2: PowerPC,e500mc@2 {
>  			device_type = "cpu";
>  			reg = <2>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x20000000>;
>  			L2_2: l2-cache {
> @@ -119,7 +119,7 @@
>  		cpu3: PowerPC,e500mc@3 {
>  			device_type = "cpu";
>  			reg = <3>;
> -			clocks = <&mux3>;
> +			clocks = <&clockgen 1 3>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x10000000>;
>  			L2_3: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
> index 187676f..81bc75a 100644
> --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
> @@ -354,24 +354,6 @@
>  /include/ "qoriq-clockgen1.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux2";
> -		};
> -
> -		mux3: mux3@60 {
> -			#clock-cells = <0>;
> -			reg = <0x60 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux3";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
> index 50b73e8..db92f11 100644
> --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
> @@ -90,7 +90,7 @@
>  		cpu0: PowerPC,e500mc@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_0>;
>  			fsl,portid-mapping = <0x80000000>;
>  			L2_0: l2-cache {
> @@ -100,7 +100,7 @@
>  		cpu1: PowerPC,e500mc@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x40000000>;
>  			L2_1: l2-cache {
> @@ -110,7 +110,7 @@
>  		cpu2: PowerPC,e500mc@2 {
>  			device_type = "cpu";
>  			reg = <2>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x20000000>;
>  			L2_2: l2-cache {
> @@ -120,7 +120,7 @@
>  		cpu3: PowerPC,e500mc@3 {
>  			device_type = "cpu";
>  			reg = <3>;
> -			clocks = <&mux3>;
> +			clocks = <&clockgen 1 3>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x10000000>;
>  			L2_3: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
> index a025208..4da49b6 100644
> --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
> @@ -374,76 +374,6 @@
>  /include/ "qoriq-clockgen1.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
> -
> -		pll2: pll2@840 {
> -			#clock-cells = <1>;
> -			reg = <0x840 0x4>;
> -			compatible = "fsl,qoriq-core-pll-1.0";
> -			clocks = <&sysclk>;
> -			clock-output-names = "pll2", "pll2-div2";
> -		};
> -
> -		pll3: pll3@860 {
> -			#clock-cells = <1>;
> -			reg = <0x860 0x4>;
> -			compatible = "fsl,qoriq-core-pll-1.0";
> -			clocks = <&sysclk>;
> -			clock-output-names = "pll3", "pll3-div2";
> -		};
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux2";
> -		};
> -
> -		mux3: mux3@60 {
> -			#clock-cells = <0>;
> -			reg = <0x60 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux3";
> -		};
> -
> -		mux4: mux4@80 {
> -			#clock-cells = <0>;
> -			reg = <0x80 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
> -			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
> -			clock-output-names = "cmux4";
> -		};
> -
> -		mux5: mux5@a0 {
> -			#clock-cells = <0>;
> -			reg = <0xa0 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
> -			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
> -			clock-output-names = "cmux5";
> -		};
> -
> -		mux6: mux6@c0 {
> -			#clock-cells = <0>;
> -			reg = <0xc0 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
> -			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
> -			clock-output-names = "cmux6";
> -		};
> -
> -		mux7: mux7@e0 {
> -			#clock-cells = <0>;
> -			reg = <0xe0 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
> -			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
> -			clock-output-names = "cmux7";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
> index d56a546..0a7c65a 100644
> --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
> @@ -94,7 +94,7 @@
>  		cpu0: PowerPC,e500mc@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_0>;
>  			fsl,portid-mapping = <0x80000000>;
>  			L2_0: l2-cache {
> @@ -104,7 +104,7 @@
>  		cpu1: PowerPC,e500mc@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x40000000>;
>  			L2_1: l2-cache {
> @@ -114,7 +114,7 @@
>  		cpu2: PowerPC,e500mc@2 {
>  			device_type = "cpu";
>  			reg = <2>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x20000000>;
>  			L2_2: l2-cache {
> @@ -124,7 +124,7 @@
>  		cpu3: PowerPC,e500mc@3 {
>  			device_type = "cpu";
>  			reg = <3>;
> -			clocks = <&mux3>;
> +			clocks = <&clockgen 1 3>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x10000000>;
>  			L2_3: l2-cache {
> @@ -134,7 +134,7 @@
>  		cpu4: PowerPC,e500mc@4 {
>  			device_type = "cpu";
>  			reg = <4>;
> -			clocks = <&mux4>;
> +			clocks = <&clockgen 1 4>;
>  			next-level-cache = <&L2_4>;
>  			fsl,portid-mapping = <0x08000000>;
>  			L2_4: l2-cache {
> @@ -144,7 +144,7 @@
>  		cpu5: PowerPC,e500mc@5 {
>  			device_type = "cpu";
>  			reg = <5>;
> -			clocks = <&mux5>;
> +			clocks = <&clockgen 1 5>;
>  			next-level-cache = <&L2_5>;
>  			fsl,portid-mapping = <0x04000000>;
>  			L2_5: l2-cache {
> @@ -154,7 +154,7 @@
>  		cpu6: PowerPC,e500mc@6 {
>  			device_type = "cpu";
>  			reg = <6>;
> -			clocks = <&mux6>;
> +			clocks = <&clockgen 1 6>;
>  			next-level-cache = <&L2_6>;
>  			fsl,portid-mapping = <0x02000000>;
>  			L2_6: l2-cache {
> @@ -164,7 +164,7 @@
>  		cpu7: PowerPC,e500mc@7 {
>  			device_type = "cpu";
>  			reg = <7>;
> -			clocks = <&mux7>;
> +			clocks = <&clockgen 1 7>;
>  			next-level-cache = <&L2_7>;
>  			fsl,portid-mapping = <0x01000000>;
>  			L2_7: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
> index bfba0b4..2d74ea8 100644
> --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
> @@ -96,7 +96,7 @@
>  		cpu0: PowerPC,e5500@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_0>;
>  			fsl,portid-mapping = <0x80000000>;
>  			L2_0: l2-cache {
> @@ -106,7 +106,7 @@
>  		cpu1: PowerPC,e5500@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x40000000>;
>  			L2_1: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
> index e2bd931..16b454b 100644
> --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
> @@ -319,24 +319,6 @@
>  /include/ "qoriq-clockgen1.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux2";
> -		};
> -
> -		mux3: mux3@60 {
> -			#clock-cells = <0>;
> -			reg = <0x60 0x4>;
> -			compatible = "fsl,qoriq-core-mux-1.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -			clock-output-names = "cmux3";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
> index dbd5775..ed89dbb 100644
> --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
> @@ -102,7 +102,7 @@
>  		cpu0: PowerPC,e5500@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_0>;
>  			fsl,portid-mapping = <0x80000000>;
>  			L2_0: l2-cache {
> @@ -112,7 +112,7 @@
>  		cpu1: PowerPC,e5500@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x40000000>;
>  			L2_1: l2-cache {
> @@ -122,7 +122,7 @@
>  		cpu2: PowerPC,e5500@2 {
>  			device_type = "cpu";
>  			reg = <2>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x20000000>;
>  			L2_2: l2-cache {
> @@ -132,7 +132,7 @@
>  		cpu3: PowerPC,e5500@3 {
>  			device_type = "cpu";
>  			reg = <3>;
> -			clocks = <&mux3>;
> +			clocks = <&clockgen 1 3>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x10000000>;
>  			L2_3: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
> b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
> index 88cd70d..5c89cfa 100644
> --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
> @@ -32,55 +32,16 @@
>   * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>   */
> 
> +sysclk: sysclk {
> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <100000000>;
> +	clock-output-names = "sysclk";
> +};
> +
>  clockgen: global-utilities@e1000 {
>  	compatible = "fsl,qoriq-clockgen-1.0";
> -	ranges = <0x0 0xe1000 0x1000>;
>  	reg = <0xe1000 0x1000>;
> -	clock-frequency = <0>;
> -	#address-cells = <1>;
> -	#size-cells = <1>;
>  	#clock-cells = <2>;
> -
> -	sysclk: sysclk {
> -		#clock-cells = <0>;
> -		compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
> -		clock-output-names = "sysclk";
> -	};
> -	pll0: pll0@800 {
> -		#clock-cells = <1>;
> -		reg = <0x800 0x4>;
> -		compatible = "fsl,qoriq-core-pll-1.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "pll0", "pll0-div2";
> -	};
> -	pll1: pll1@820 {
> -		#clock-cells = <1>;
> -		reg = <0x820 0x4>;
> -		compatible = "fsl,qoriq-core-pll-1.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "pll1", "pll1-div2";
> -	};
> -	mux0: mux0@0 {
> -		#clock-cells = <0>;
> -		reg = <0x0 0x4>;
> -		compatible = "fsl,qoriq-core-mux-1.0";
> -		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -		clock-output-names = "cmux0";
> -	};
> -	mux1: mux1@20 {
> -		#clock-cells = <0>;
> -		reg = <0x20 0x4>;
> -		compatible = "fsl,qoriq-core-mux-1.0";
> -		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
> -		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
> -		clock-output-names = "cmux1";
> -	};
> -	platform_pll: platform-pll@c00 {
> -		#clock-cells = <1>;
> -		reg = <0xc00 0x4>;
> -		compatible = "fsl,qoriq-platform-pll-1.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "platform-pll", "platform-pll-div2";
> -	};
> +	clocks = <&sysclk>;
>  };
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
> b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
> index 6dfd7c5..bf649ce 100644
> --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
> @@ -32,38 +32,16 @@
>   * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>   */
> 
> +sysclk: sysclk {
> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <100000000>;
> +	clock-output-names = "sysclk";
> +};
> +
>  clockgen: global-utilities@e1000 {
>  	compatible = "fsl,qoriq-clockgen-2.0";
> -	ranges = <0x0 0xe1000 0x1000>;
>  	reg = <0xe1000 0x1000>;
> -	#address-cells = <1>;
> -	#size-cells = <1>;
>  	#clock-cells = <2>;
> -
> -	sysclk: sysclk {
> -		#clock-cells = <0>;
> -		compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
> -		clock-output-names = "sysclk";
> -	};
> -	pll0: pll0@800 {
> -		#clock-cells = <1>;
> -		reg = <0x800 0x4>;
> -		compatible = "fsl,qoriq-core-pll-2.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "pll0", "pll0-div2", "pll0-div4";
> -	};
> -	pll1: pll1@820 {
> -		#clock-cells = <1>;
> -		reg = <0x820 0x4>;
> -		compatible = "fsl,qoriq-core-pll-2.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "pll1", "pll1-div2", "pll1-div4";
> -	};
> -	platform_pll: platform-pll@c00 {
> -		#clock-cells = <1>;
> -		reg = <0xc00 0x4>;
> -		compatible = "fsl,qoriq-platform-pll-2.0";
> -		clocks = <&sysclk>;
> -		clock-output-names = "platform-pll", "platform-pll-div2";
> -	};
> +	clocks = <&sysclk>;
>  };
> diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> index 4908af5..d552044 100644
> --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> @@ -345,22 +345,6 @@
>  /include/ "qoriq-clockgen2.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
> -		mux0: mux0@0 {
> -			#clock-cells = <0>;
> -			reg = <0x0 4>;
> -			compatible = "fsl,core-mux-clock";
> -			clocks = <&pll0 0>, <&pll0 1>;
> -			clock-names = "pll0_0", "pll0_1";
> -			clock-output-names = "cmux0";
> -		};
> -		mux1: mux1@20 {
> -			#clock-cells = <0>;
> -			reg = <0x20 4>;
> -			compatible = "fsl,core-mux-clock";
> -			clocks = <&pll0 0>, <&pll0 1>;
> -			clock-names = "pll0_0", "pll0_1";
> -			clock-output-names = "cmux1";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
> index 9d08a36..d87ea13 100644
> --- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
> @@ -74,7 +74,7 @@
>  		cpu0: PowerPC,e5500@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			#cooling-cells = <2>;
>  			L2_1: l2-cache {
> @@ -84,7 +84,7 @@
>  		cpu1: PowerPC,e5500@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			#cooling-cells = <2>;
>  			L2_2: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> index 145c7f4..315d055 100644
> --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
> @@ -425,50 +425,6 @@
>  /include/ "qoriq-clockgen2.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
> -
> -		mux0: mux0@0 {
> -			#clock-cells = <0>;
> -			reg = <0x0 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll1-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux0";
> -		};
> -
> -		mux1: mux1@20 {
> -			#clock-cells = <0>;
> -			reg = <0x20 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll1-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux1";
> -		};
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll1-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux2";
> -		};
> -
> -		mux3: mux3@60 {
> -			#clock-cells = <0>;
> -			reg = <0x60 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0_0", "pll0_1", "pll0_2",
> -				"pll1_0", "pll1_1", "pll1_2";
> -			clock-output-names = "cmux3";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
> index 6db0ee8..dd59e4b 100644
> --- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
> @@ -74,7 +74,7 @@
>  		cpu0: PowerPC,e5500@0 {
>  			device_type = "cpu";
>  			reg = <0>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			#cooling-cells = <2>;
>  			L2_1: l2-cache {
> @@ -84,7 +84,7 @@
>  		cpu1: PowerPC,e5500@1 {
>  			device_type = "cpu";
>  			reg = <1>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			#cooling-cells = <2>;
>  			L2_2: l2-cache {
> @@ -94,7 +94,7 @@
>  		cpu2: PowerPC,e5500@2 {
>  			device_type = "cpu";
>  			reg = <2>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_3>;
>  			#cooling-cells = <2>;
>  			L2_3: l2-cache {
> @@ -104,7 +104,7 @@
>  		cpu3: PowerPC,e5500@3 {
>  			device_type = "cpu";
>  			reg = <3>;
> -			clocks = <&mux3>;
> +			clocks = <&clockgen 1 3>;
>  			next-level-cache = <&L2_4>;
>  			#cooling-cells = <2>;
>  			L2_4: l2-cache {
> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> index a97296c..ecbb447 100644
> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> @@ -535,28 +535,6 @@
>  /include/ "qoriq-clockgen2.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
> -
> -		mux0: mux0@0 {
> -			#clock-cells = <0>;
> -			reg = <0x0 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll0-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux0";
> -		};
> -
> -		mux1: mux1@20 {
> -			#clock-cells = <0>;
> -			reg = <0x20 4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> -			clock-names = "pll0", "pll0-div2", "pll0-div4",
> -				"pll1", "pll1-div2", "pll1-div4";
> -			clock-output-names = "cmux1";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
> index c2e5720..3f745de 100644
> --- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
> @@ -81,28 +81,28 @@
>  		cpu0: PowerPC,e6500@0 {
>  			device_type = "cpu";
>  			reg = <0 1>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu1: PowerPC,e6500@2 {
>  			device_type = "cpu";
>  			reg = <2 3>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu2: PowerPC,e6500@4 {
>  			device_type = "cpu";
>  			reg = <4 5>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu3: PowerPC,e6500@6 {
>  			device_type = "cpu";
>  			reg = <6 7>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index 68c4ead..fcac734 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -950,67 +950,6 @@
>  /include/ "qoriq-clockgen2.dtsi"
>  	global-utilities@e1000 {
>  		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
> -
> -		pll2: pll2@840 {
> -			#clock-cells = <1>;
> -			reg = <0x840 0x4>;
> -			compatible = "fsl,qoriq-core-pll-2.0";
> -			clocks = <&sysclk>;
> -			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
> -		};
> -
> -		pll3: pll3@860 {
> -			#clock-cells = <1>;
> -			reg = <0x860 0x4>;
> -			compatible = "fsl,qoriq-core-pll-2.0";
> -			clocks = <&sysclk>;
> -			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
> -		};
> -
> -		pll4: pll4@880 {
> -			#clock-cells = <1>;
> -			reg = <0x880 0x4>;
> -			compatible = "fsl,qoriq-core-pll-2.0";
> -			clocks = <&sysclk>;
> -			clock-output-names = "pll4", "pll4-div2", "pll4-div4";
> -		};
> -
> -		mux0: mux0@0 {
> -			#clock-cells = <0>;
> -			reg = <0x0 0x4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				<&pll1 0>, <&pll1 1>, <&pll1 2>,
> -				<&pll2 0>, <&pll2 1>, <&pll2 2>;
> -			clock-names = "pll0", "pll0-div2", "pll0-div4",
> -				"pll1", "pll1-div2", "pll1-div4",
> -				"pll2", "pll2-div2", "pll2-div4";
> -			clock-output-names = "cmux0";
> -		};
> -
> -		mux1: mux1@20 {
> -			#clock-cells = <0>;
> -			reg = <0x20 0x4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> -				<&pll1 0>, <&pll1 1>, <&pll1 2>,
> -				<&pll2 0>, <&pll2 1>, <&pll2 2>;
> -			clock-names = "pll0", "pll0-div2", "pll0-div4",
> -				"pll1", "pll1-div2", "pll1-div4",
> -				"pll2", "pll2-div2", "pll2-div4";
> -			clock-output-names = "cmux1";
> -		};
> -
> -		mux2: mux2@40 {
> -			#clock-cells = <0>;
> -			reg = <0x40 0x4>;
> -			compatible = "fsl,qoriq-core-mux-2.0";
> -			clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
> -				<&pll4 0>, <&pll4 1>, <&pll4 2>;
> -			clock-names = "pll3", "pll3-div2", "pll3-div4",
> -				"pll4", "pll4-div2", "pll4-div4";
> -			clock-output-names = "cmux2";
> -		};
>  	};
> 
>  	rcpm: global-utilities@e2000 {
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
> b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
> index 038cf8f..632314c 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
> @@ -90,84 +90,84 @@
>  		cpu0: PowerPC,e6500@0 {
>  			device_type = "cpu";
>  			reg = <0 1>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu1: PowerPC,e6500@2 {
>  			device_type = "cpu";
>  			reg = <2 3>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu2: PowerPC,e6500@4 {
>  			device_type = "cpu";
>  			reg = <4 5>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu3: PowerPC,e6500@6 {
>  			device_type = "cpu";
>  			reg = <6 7>;
> -			clocks = <&mux0>;
> +			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&L2_1>;
>  			fsl,portid-mapping = <0x80000000>;
>  		};
>  		cpu4: PowerPC,e6500@8 {
>  			device_type = "cpu";
>  			reg = <8 9>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x40000000>;
>  		};
>  		cpu5: PowerPC,e6500@10 {
>  			device_type = "cpu";
>  			reg = <10 11>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x40000000>;
>  		};
>  		cpu6: PowerPC,e6500@12 {
>  			device_type = "cpu";
>  			reg = <12 13>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x40000000>;
>  		};
>  		cpu7: PowerPC,e6500@14 {
>  			device_type = "cpu";
>  			reg = <14 15>;
> -			clocks = <&mux1>;
> +			clocks = <&clockgen 1 1>;
>  			next-level-cache = <&L2_2>;
>  			fsl,portid-mapping = <0x40000000>;
>  		};
>  		cpu8: PowerPC,e6500@16 {
>  			device_type = "cpu";
>  			reg = <16 17>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x20000000>;
>  		};
>  		cpu9: PowerPC,e6500@18 {
>  			device_type = "cpu";
>  			reg = <18 19>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x20000000>;
>  		};
>  		cpu10: PowerPC,e6500@20 {
>  			device_type = "cpu";
>  			reg = <20 21>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x20000000>;
>  		};
>  		cpu11: PowerPC,e6500@22 {
>  			device_type = "cpu";
>  			reg = <22 23>;
> -			clocks = <&mux2>;
> +			clocks = <&clockgen 1 2>;
>  			next-level-cache = <&L2_3>;
>  			fsl,portid-mapping = <0x20000000>;
>  		};
> --
> 1.7.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux