This simply moves ip101a_g_config_init right above
ip101a_g_config_intr so all functions for the ICPlus IP101A/G PHYs are
grouped together.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
drivers/net/phy/icplus.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index ad87bd3280d7..3d3e9134c762 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -162,21 +162,6 @@ static int ip1001_config_init(struct phy_device *phydev)
return 0;
}
-static int ip101a_g_config_init(struct phy_device *phydev)
-{
- int c;
-
- c = ip1xx_reset(phydev);
- if (c < 0)
- return c;
-
- /* Enable Auto Power Saving mode */
- c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
- c |= IP101A_G_APS_ON;
-
- return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
-}
-
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->mdio.addr == 4) /* WAN port */
@@ -196,6 +181,21 @@ static int ip175c_config_aneg(struct phy_device *phydev)
return 0;
}
+static int ip101a_g_config_init(struct phy_device *phydev)
+{
+ int c;
+
+ c = ip1xx_reset(phydev);
+ if (c < 0)
+ return c;
+
+ /* Enable Auto Power Saving mode */
+ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ c |= IP101A_G_APS_ON;
+
+ return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+}
+
static int ip101a_g_config_intr(struct phy_device *phydev)
{
u16 val;
--
2.19.1
