On Sun, Nov 11, 2018 at 03:15:36PM +0100, Lorenzo Bianconi wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index 879322ad50fd..69d53d98d0f0 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -13,6 +13,7 @@ Required properties: > Optional properties: > - st,drdy-int-pin: the pin on the package that will be used to signal > "data ready" (valid values: 1 or 2). > +- st,pullups : enable/disable internal i2c controller pullup resistors. bias-pull-up is the standard property for this. > - drive-open-drain: the interrupt/data ready line will be configured > as open drain, which is useful if several sensors share the same > interrupt line. This is a boolean property. > -- > 2.19.1 >
