On Wed, Nov 14, 2018 at 06:52:39PM +0100, Lucas Stach wrote: > This is the evaluation kit board for the i.MX8M. The current level of > support yields a working console and is able to boot userspace from > SD card or Network. > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx> (v1) > Tested-by: Tested-by: Baruch Siach <baruch@xxxxxxxxxx> (v1) > Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx> > --- > v2: > - move to freescale folder > - fix indentation > - fix typo in Makefile > - document compatible > - switch to generic pinconf > v3: > - rebase to v4.19-rc1 and already merged pinctrl driver and pending > clk driver > v4: > - rebased to 4.10-rc1 > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm64/boot/dts/freescale/Makefile | 2 + > arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 290 ++++++++++++++++++ > 3 files changed, 296 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-evk.dts You missed my R-by on v3. Rob
