For 4-lane, burst mode panels would need to enable 2byte trail_fill
along with filling trail_env in dsi base control register.
Similar reference code avialable in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
if (panel->lcd_dsi_lane == 4)
{
dsi_dev[sel]->dsi_basic_ctl.bits.trail_inv = 0xc;
dsi_dev[sel]->dsi_basic_ctl.bits.trail_fill = 1;
}
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 0182408f8932..22d2987c3298 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -34,6 +34,8 @@
#define SUN6I_DSI_CTL_EN BIT(0)
#define SUN6I_DSI_BASIC_CTL_REG 0x00c
+#define SUN6I_DSI_BASIC_CTL_TRAIL_INV(n) (((n) & 0xf) << 4)
+#define SUN6I_DSI_BASIC_CTL_TRAIL_FILL BIT(3)
#define SUN6I_DSI_BASIC_CTL_HBP_DIS BIT(2)
#define SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS BIT(1)
#define SUN6I_DSI_BASIC_CTL_VIDEO_BURST BIT(0)
@@ -559,6 +561,10 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
/* enable burst mode */
regmap_read(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, &val);
val |= SUN6I_DSI_BASIC_CTL_VIDEO_BURST;
+ if (device->lanes == 4) {
+ val |= SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
+ val |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL;
+ }
regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, val);
}
--
2.18.0.321.gffc6fa0e3
