From: Matthias Brugger <mbrugger@xxxxxxxx> This is version four of the series. The biggest change are the last four patches which introduce how this should be handled in the future. Instead of creating the platform device in the DRM driver the device tree has in the mmsys memory range a child node to probe the clock part. That breaks backwards compatibility, so I only introduce that for SoCs which are not available to the general public (mt2712e) or only have the mmsys clock driver part implemented (mt6797). Changes since v4: - fix missing regmap accessors in drm diver (patch 1) - omit probe deffered warning on all drivers (patch 5) - update drm and clk bindings (patch 6 and 7) - put mmsys clock part in dts child node of mmsys. Only done for HW where no dts backport compatible breakage is expected (either DRM driver not yet implemented or no HW available to the public) (patch 9 to 12) Changes since v3: - use platform device to probe clock driver - add Acked-by CK Hu for the probe deferred patch Changes since v2: - fix kconfig typo (shame on me) - delete __initconst from mm_clocks as converted to a platform driver Changes since v1: - add binding documentation - ddp: use regmap_update_bits - ddp: ignore EPROBE_DEFER on clock probing - mfd: delete mmsys_private - add Reviewed-by and Acked-by tags MMSYS in Mediatek SoCs has some registers to control clock gates (which is used in the clk driver) and some registers to set the routing and enable the differnet blocks of the display subsystem. Up to now both drivers, clock and drm are probed with the same device tree compatible. But only the first driver get probed, which in effect breaks graphics on mt8173 and mt2701. This patch uses a platform device registration in the DRM driver, which will trigger the probe of the corresponding clock driver. It was tested on the bananapi-r2 and the Acer R13 Chromebook. Matthias Brugger (12): drm/mediatek: Use regmap for register access clk: mediatek: mt2701-mmsys: switch to platform device probing clk: mediatek: mt8173: switch mmsys to platform device probing drm/mediatek: Add support for mmsys through a pdev drm: mediatek: Omit warning on probe defers drm/mediatek: update dt-bindings dt-bindings: clock: mediatek: delete mmsys clocks dt-bindings: mediatek: Change the binding for mmsys clocks arm64: dts: mt2712e: Use the new mmsys clock compatible arm64: dts: mt6797: Use the new mmsys clock compatible clk: mediatek: mt2712e: Probe with new compatible clk: mediatek: mt6797: Probe with new compatible .../bindings/arm/mediatek/mediatek,mmsys.txt | 24 +++++---- .../display/mediatek/mediatek,disp.txt | 34 +++++++----- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 8 ++- arch/arm64/boot/dts/mediatek/mt6797.dtsi | 8 ++- drivers/clk/mediatek/clk-mt2701-mm.c | 42 ++++++++++----- drivers/clk/mediatek/clk-mt2712-mm.c | 9 ++-- drivers/clk/mediatek/clk-mt6797-mm.c | 9 ++-- drivers/clk/mediatek/clk-mt8173.c | 51 +++++++++++++++--- drivers/gpu/drm/mediatek/mtk_disp_color.c | 4 +- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 4 +- drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 4 +- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 4 +- drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 53 ++++++++----------- drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 4 +- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 34 +++++++++--- drivers/gpu/drm/mediatek/mtk_drm_drv.h | 4 +- drivers/gpu/drm/mediatek/mtk_dsi.c | 6 ++- 17 files changed, 200 insertions(+), 102 deletions(-) -- 2.19.1
