The quadspi is a generic communication interface which could be shared with other MediaTek SoCs. Hence rename it to a common one. Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> --- drivers/mtd/spi-nor/Kconfig | 16 ++++++++-------- drivers/mtd/spi-nor/Makefile | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 6cc9c92..2062611 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -7,14 +7,6 @@ menuconfig MTD_SPI_NOR if MTD_SPI_NOR -config MTD_MT81xx_NOR - tristate "Mediatek MT81xx SPI NOR flash controller" - depends on HAS_IOMEM - help - This enables access to SPI NOR flash, using MT81xx SPI NOR flash - controller. This controller does not support generic SPI BUS, it only - supports SPI NOR Flash. - config MTD_SPI_NOR_USE_4K_SECTORS bool "Use small 4096 B erase sectors" default y @@ -86,6 +78,14 @@ config SPI_NXP_SPIFI Flash. Enable this option if you have a device with a SPIFI controller and want to access the Flash as a mtd device. +config SPI_MTK_QUADSPI + tristate "MediaTek Quad SPI controller" + depends on HAS_IOMEM + help + This enables support for the Quad SPI controller in master mode. + This controller does not support generic SPI. It only supports + SPI NOR. + config SPI_INTEL_SPI tristate diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index f4c61d2..7f4b6f6 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o -obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o +obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o -- 1.9.1
