This patch adds a driver for Fixed MMIO clock.
The driver reads a clock frequency value from a single 32-bit memory
mapped register and registers it as a fixed rate clock.
It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option.
Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx>
---
drivers/clk/Kconfig | 6 ++++++
drivers/clk/Makefile | 1 +
drivers/clk/clk-fixed-mmio.c | 49 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 56 insertions(+)
create mode 100644 drivers/clk/clk-fixed-mmio.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 81cdb4eaca..69c7fb859c 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -283,6 +283,12 @@ config COMMON_CLK_STM32H7
---help---
Support for stm32h7 SoC family clocks
+config COMMON_CLK_FIXED_MMIO
+ bool "Clock driver for Memory Mapped Fixed values"
+ depends on COMMON_CLK && OF
+ help
+ Support for Memory Mapped IO Fixed clocks
+
source "drivers/clk/actions/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 72be7a38cf..4e61961dc1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
+obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
diff --git a/drivers/clk/clk-fixed-mmio.c b/drivers/clk/clk-fixed-mmio.c
new file mode 100644
index 0000000000..bbcadab345
--- /dev/null
+++ b/drivers/clk/clk-fixed-mmio.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Memory Mapped IO Fixed Clock driver
+ *
+ * Copyright (C) 2018 Cadence Design Systems, Inc.
+ *
+ * Authors:
+ * Jan Kotas <jank@xxxxxxxxxxx>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+static void __init of_fixed_mmio_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ void __iomem *base;
+ u32 clk_freq;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%pOFn: failed to map address\n", node);
+ return;
+ }
+
+ clk_freq = readl(base);
+ iounmap(base);
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ clk = clk_register_fixed_rate(NULL, clk_name, NULL, 0, clk_freq);
+ if (IS_ERR(clk)) {
+ pr_err("%pOFn: failed to register fixed rate clock\n", node);
+ return;
+ }
+
+ if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) {
+ pr_err("%pOFn: failed to add clock provider\n", node);
+ return;
+ }
+
+ pr_info("%pOFn: registered fixed-mmio-clock at %u Hz\n",
+ node, clk_freq);
+}
+
+CLK_OF_DECLARE(fixed_mmio_clk, "fixed-mmio-clock", of_fixed_mmio_clk_setup);
--
2.15.0
