This serie adds the support of the hardware semaphore block for stm32mp1 SoC. version 4: - add Linaro SoB version 3: - fix clock name in properties description. - use postcore_initcall() instead of module_platform_driver() version 2: - fix comments done by Bjorn about clock naming, license terms in header, alphabetic ordering in Makefile and Kconfig and remove function - Do not push test module in this version while waiting for feedbacks about it Benjamin Gaignard (4): dt-bindings: hwlock: Document STM32 hwspinlock bindings hwspinlock: add STM32 hwspinlock device ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1 .../bindings/hwlock/st,stm32-hwspinlock.txt | 23 +++ arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 + arch/arm/boot/dts/stm32mp157c.dtsi | 9 ++ drivers/hwspinlock/Kconfig | 9 ++ drivers/hwspinlock/Makefile | 1 + drivers/hwspinlock/stm32_hwspinlock.c | 156 +++++++++++++++++++++ 6 files changed, 202 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c -- 2.15.0
