[PATCH v4 09/26] drm/sun4i: sun6i_mipi_dsi: Fix TCON DRQ set bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



TCON DRQ set bits for non-burst DSI mode can computed via
horizontal front porch instead of front porch + sync timings.

BSP code form BPI-M64-bsp is computing TCON DRQ set bits
for non-burts as (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

=> panel->lcd_ht -    panel->lcd_x - panel->lcd_hbp
=> (timmings->hor_front_porch + panel->lcd_hbp + panel->lcd_x)
   - panel->lcd_x - panel->hbp
=> timmings->hor_front_porch
=> mode->hsync_start - mode->hdisplay

So, update the DRQ set bits accordingly.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index eeea977604ac..fc4252d96c38 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -367,9 +367,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 	struct mipi_dsi_device *device = dsi->device;
 	u32 val = 0;
 
-	if ((mode->hsync_end - mode->hdisplay) > 20) {
+	if ((mode->hsync_start - mode->hdisplay) > 20) {
 		/* Maaaaaagic */
-		u16 drq = (mode->hsync_end - mode->hdisplay) - 20;
+		u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
 
 		drq *= mipi_dsi_pixel_format_to_bpp(device->format);
 		drq /= 32;
-- 
2.18.0.321.gffc6fa0e3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux