Add bindings for STM32 hardware spinlock device
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
version 3 :
- fix clock name in properties description
version 2 :
- change clock name from hwspinlock to hsem to be align with hardware
documentation
.../bindings/hwlock/st,stm32-hwspinlock.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
new file mode 100644
index 000000000000..adf4f000ea3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
@@ -0,0 +1,23 @@
+STM32 Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "st,stm32-hwspinlock".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+ hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "hsem".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+ common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+ hwspinlock@4c000000 {
+ compatible = "st,stm32-hwspinlock";
+ #hwlock-cells = <1>;
+ reg = <0x4c000000 0x400>;
+ clocks = <&rcc HSEM>;
+ clock-names = "hsem";
+ };
--
2.15.0
