On 11/11/2018 09:16 PM, Pavel Machek wrote: > Hi! > >>>> diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt >>>> index 836cb16..e9009c4 100644 >>>> --- a/Documentation/leds/leds-class.txt >>>> +++ b/Documentation/leds/leds-class.txt >>>> @@ -43,7 +43,7 @@ LED Device Naming >>>> >>>> Is currently of the form: >>>> >>>> -"devicename:colour:function" >>>> +"colour:function" >>>> >>> >>> I don't think we want to do it in all cases. >>> >>> So, on my cellphone seeing lp5523:green:led is indeed not useful. >>> >>> But on notebook with usb keyboard attached, you need to keep the >>> devicename to be able to distinguish capslock on internal keyboard and >>> capslock on first USB keyboard and capslock on second USB keyboard. >>> >>> Taking look at the list of functions, here's stuff like "hdd" and >>> "hdderr". I assume the first means hdd activity... If we can do it, it >>> would be nicest to have "sda:green:activity" and maybe >>> "sda:red:error". For a raid array with 8 drives... >>> >>> For example I have a router running linux. It has 4 lan ports, with >>> correspondings LED, and an wan led. >>> >>> Having "green:lan1" to "green:lan4" and "green:wan" plus >>> "red:wanerror" would work, but I'd really preffer >>> "eth0:green:link"... "adsl0:green:link", "adsl0:red:error". >>> >>> There are now phones with flashes on both main and selfie >>> cameras. Again, knowing which device is which is important. As is >>> knowing which display is controlled by particular backlight. >> >> It's overcomplicating the naming again. In every case you can tweak >> the function name to eth0_link, eth1_link etc. > > Well, but in such case it would be good to keep existing scheme. > > My system looks like this: > > input16::capslock tpacpi::bay_active tpacpi::standby > input16::numlock tpacpi::dock_active tpacpi::thinklight > input16::scrolllock tpacpi::dock_batt tpacpi::thinkvantage > input5::capslock tpacpi::dock_status1 tpacpi::unknown_led > input5::numlock tpacpi::dock_status2 tpacpi::unknown_led2 > input5::scrolllock tpacpi:green:batt tpacpi::unknown_led3 > > I agree that we should get rid of "tpacpi:" part in some cases. But > it does not make sense to get rid of "input16:" part -- it tells you > if the LED is on USB or on built-in keyboard. > > Ideally, tpacpi::thinklight would be input5::frontlight (as it is > frontlight for the keyboard). > > Yes we should simplify, but it still needs to work in all cases. Well, label is not being removed. You still can use it an the old fashion, even when using new led_compose_name(). Maybe removing the description of the old LED naming from Documentation/leds/leds-class.txt was too drastic move. I'll keep it next to the new one, and only add a note that it is kept only for backwards compatibility. -- Best regards, Jacek Anaszewski
