From: Gerhard Sittig <gsi@xxxxxxx> introduce a device tree binding document for the MPC512x DMA controller Signed-off-by: Gerhard Sittig <gsi@xxxxxxx> [ a13xp0p0v88@xxxxxxxxx: turn this into a separate patch ] --- .../devicetree/bindings/dma/mpc512x-dma.txt | 55 ++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/mpc512x-dma.txt diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt new file mode 100644 index 0000000..a4867d5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt @@ -0,0 +1,55 @@ +* Freescale MPC512x DMA Controller + +The DMA controller in the Freescale MPC512x SoC can move blocks of +memory contents between memory and peripherals or memory to memory. + +Refer to the "Generic DMA Controller and DMA request bindings" description +in the dma.txt file for a more detailled discussion of the binding. The +MPC512x DMA engine binding follows the common scheme, but doesn't provide +support for the optional channels and requests counters (those values are +derived from the detected hardware features) and has a fixed client +specifier length of 1 integer cell (the value is the DMA channel, since +the DMA controller uses a fixed assignment of request lines per channel). + + +DMA controller node properties: + +Required properties: +- compatible: should be "fsl,mpc5121-dma" +- reg: address and size of the DMA controller's register set +- interrupts: interrupt spec for the DMA controller + +Optional properties: +- #dma-cells: must be <1>, describes the number of integer cells + needed to specify the 'dmas' property in client nodes, + strongly recommended since common client helper code + uses this property + +Example: + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + + +Client node properties: + +Required properties: +- dmas: list of DMA specifiers, consisting each of a handle + for the DMA controller and integer cells to specify + the channel used within the DMA controller +- dma-names: list of identifier strings for the DMA specifiers, + client device driver code uses these strings to + have DMA channels looked up at the controller + +Example: + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + /* ... */ + dmas = <&dma0 30>; + dma-names = "rx-tx"; + }; -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html