[PATCH v6 01/10] dt-bindings: fsi: Add P9 OCC device documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>

Document the bindings for the FSI-attached POWER9 On-Chip Controller.

Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt

diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
new file mode 100644
index 0000000..99ca986
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
@@ -0,0 +1,16 @@
+Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
+---------------------------------------------------------------------
+
+This is the binding for the P9 On-Chip Controller accessed over FSI from a
+service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+nodes. The OCC is not an FSI slave device itself, rather it is accessed
+through the SBE fifo.
+
+Required properties:
+ - compatible = "ibm,p9-occ"
+
+Examples:
+
+    occ {
+        compatible = "ibm,p9-occ";
+    };
-- 
1.8.3.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux