[PATCH v2 1/4] dt-bindings: hwlock: Document STM32 hwspinlock bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add bindings for STM32 hardware spinlock device

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
version 2 :
- change clock name from hwspinlock to hsem to be align with hardware
  documentation

 .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt

diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
new file mode 100644
index 000000000000..6e933b218574
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
@@ -0,0 +1,23 @@
+STM32 Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "st,stm32-hwspinlock".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+	hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "hwspinlock".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+	common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+	hwspinlock@4c000000 {
+		compatible = "st,stm32-hwspinlock";
+		#hwlock-cells = <1>;
+		reg = <0x4c000000 0x400>;
+		clocks = <&rcc HSEM>;
+		clock-names = "hsem";
+	};
-- 
2.15.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux