Re: [PATCH 15/15] arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 07, 2018 at 06:13:08PM +0800, Chen-Yu Tsai wrote:
> The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side
> identifies as BCM43430, while the Bluetooth side identifies as BCM43438.
> 
> The Bluetooth side is connected to UART1 in a 4 wire configuration. Same
> as the WiFi side, due to being the same chip and package, DLDO2 provides
> overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC
> clock output provides the LPO low power clock at 32.768 kHz.
> 
> This patch enables Bluetooth on this board, and also adds the missing
> LPO clock on the WiFi side. There is also a PCM connection for Bluetooth,
> but this is not covered here.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>

Thanks for figuring this out!

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux