hi, On Tue, 2018-10-30 at 18:30 -0400, Alan Cooper wrote: > On 10/17/18 9:46 PM, Chunfeng Yun wrote:> hi, > > > > On Wed, 2018-10-17 at 18:29 -0400, Al Cooper wrote: > >> Add the ability to skip calling the PHY's exit routine on suspend > >> and the PHY's init routine on resume. This is to handle a USB PHY > >> that should have it's power_off function called on suspend but > cannot > >> have it's exit function called because on exit it will disable the > >> PHY to the point where register accesses to the Host Controllers > >> using the PHY will be disabled and the host drivers will crash. > >> > >> This is enabled with the HCD flag "suspend_without_phy_exit" which > >> can be set from any HCD driver. > >> > >> Signed-off-by: Al Cooper<alcooperx@xxxxxxxxx> > >> --- > >> drivers/usb/core/hcd.c | 8 ++++---- > >> drivers/usb/core/phy.c | 18 ++++++++++++------ > >> drivers/usb/core/phy.h | 9 ++++++--- > >> include/linux/usb/hcd.h | 3 +++ > >> 4 files changed, 25 insertions(+), 13 deletions(-) > >> > >> unsigned skip_phy_initialization:1; > >> > >> + /* Some phys don't want the phy's exit/init called on > suspend/resume */ > >> + unsigned suspend_without_phy_exit:1; > > As suggested before, you can skip phy's exit/init during > suspend/resume > > by enabling wakeup of hcd, so needn't add a new variable for it. > > I still need to be able to enable and disable wakeup for this driver. Just use device_init_wakeup(dev, true) instead of device_wakeup_enable(dev) for your controller driver, you can try it. Sorry for the late replay > > > > >> + > >> /* The next flag is a stopgap, to be removed when all the > HCDs > >> * support the new root-hub polling mechanism. */ > >> unsigned uses_new_polling:1; > >
