Re: [PATCH V3 4/6] usb: ohci-platform: Add support for Broadcom STB SoC's

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 7 Nov 2018, Al Cooper wrote:

> On 11/7/18 10:23 AM, Alan Stern wrote:
> > On Tue, 6 Nov 2018, Florian Fainelli wrote:
> > 
> >> On 11/6/18 1:40 PM, Al Cooper wrote:
> >>> On 11/6/18 11:08 AM, Alan Stern wrote:
> >>>> On Mon, 5 Nov 2018, Al Cooper wrote:
> >>>>
> >>>>> Add support for Broadcom STB SoC's to the ohci platform driver.
> >>>>>
> >>>>> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> >>>>> ---
> >>>>
> >>>>> @@ -177,6 +189,8 @@ static int ohci_platform_probe(struct
> >>>>> platform_device *dev)
> >>>>>            ohci->flags |= OHCI_QUIRK_FRAME_NO;
> >>>>>        if (pdata->num_ports)
> >>>>>            ohci->num_ports = pdata->num_ports;
> >>>>> +    if (pdata->suspend_without_phy_exit)
> >>>>> +        hcd->suspend_without_phy_exit = 1;
> >>>>
> >>>> Sorry if I missed this in the earlier discussions...  Is there any
> >>>> possibility of adding a DT binding that could express this requirement,
> >>>> instead of putting it in the platform data?
> >>>>
> >>>> Alan Stern
> >>>>
> >>>
> >>> Alan,
> >>>
> >>> That was my original approach but internal review suggested that I use
> >>> pdata instead. Below is my original patch for:
> >>
> >> And the reason for that suggestion was really because it was percevied
> >> as encoding a driver behavior as a Device Tree property as opposed to
> >> describing something that was inherently and strictly a hardware
> >> behavior (therefore suitable for Device Tree).
> > 
> > Right.  The best way to approach this problem is to identify and
> > characterize the hardware behavior which makes this override necessary.
> > Then _that_ can be added to DT, since it will be a property of the
> > hardware rather than of the driver.
> > 
> >>> Add the ability to skip calling the PHY's exit routine on suspend
> >>> and the PHY's init routine on resume. This is to handle a USB PHY
> >>> that should have it's power_off function called on suspend but cannot
> >>> have it's exit function called because on exit it will disable the
> >>> PHY to the point where register accesses to the Host Controllers
> >>> using the PHY will be disabled and the host drivers will crash.
> > 
> > What's special about this PHY?  Why does the exit function mess the PHY
> > up?  Or to put it another way, why doesn't the exit function mess up
> > other PHYs in the same way?
> > 
> > For that matter, can we change the code so that suspend doesn't call
> > the exit function for _any_ PHY?  Will just calling the power_off
> > function be good enough?  If not, then why not?
> > 
> > Alan Stern
> > 
> 
> In our USB hardware the USB PHY supplies a clock for the EHCI/OHCI and 
> XHCI host controllers and if the PHY is totally shut down the EHCI, OHCI 
> and XHCI registers will cause an exception if accessed and cause the 
> EHCI, OHCI and XHCI drivers to crash. There is always talk of fixing 
> this in the hardware by adding an aux clock that will takeover when the 
> PHY clock is shut down, but this hasn't happened yet. It seems like 
> "exit on suspend" still makes sense on systems that don't have this 
> problem (additional power savings?) so removing the exit on suspend for 
> all systems is not a good idea.

Then in theory you should be able to add a Device Tree property which
says that the PHY provides a clock for the USB host controller.  That
is strictly a property of the hardware; it has nothing to do with the
driver.  Therefore it is appropriate for DT.

Wouldn't this solve your issue?

Alan Stern





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux