Re: [RFC 0/2] Add RISC-V cpu topology

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 07, 2018 at 04:31:34AM +0200, Nick Kossifidis wrote:
> Mark and Sundeep thanks a lot for your feedback, I guess you convinced
> me that having a device tree binding for the scheduler is not a
> correct approach. It's not a device after all and I agree that the
> device tree shouldn't become an OS configuration file.

Good to hear.

> Regarding multiple levels of shared resources my point is that since
> cpu-map doesn't contain any information of what is shared among the
> cluster/core members it's not easy to do any further translation. Last
> time I checked the arm code that uses cpu-map, it only defines one
> domain for SMT, one for MC and then everything else is ignored. No
> matter how many clusters have been defined, anything above the core
> level is the same (and then I guess you started talking about adding
> "packages" on the representation side).

While cpu-map doesn't contain that information today, we can *add* that
information to the cpu-map binding if necessary.

> The reason I proposed to have a binding for the scheduler directly is
> not only because it's simpler and closer to what really happens in the
> code, it also makes more sense to me than the combination of cpu-map
> with all the related mappings e.g.  for numa or caches or power
> domains etc.
> 
> However you are right we could definitely augment cpu-map to include
> support for what I'm saying and clean things up, and since you are
> open about improving it here is a proposal that I hope you find
> interesting:
> 
> At first let's get rid of the <thread> nodes, they don't make sense:
> 
> thread0 {
>  cpu = <&CPU0>;
> };
> 
> A thread node can't have more than one cpu entry and any properties
> should be on the cpu node itself, so it doesn't / can't add any
> more information. We could just have an array of cpu nodes on the
> <core> node, it's much cleaner this way.
> 
> core0 {
>  members = <&CPU0>, <&CPU1>;
> };

Hold on. Rather than reinventing things from first principles, can we
please discuss what you want to *achieve*, i.e. what information you
need?

Having a node is not a significant cost, and there are reasons we may
want thread nodes. For example, it means that we can always refer to any
level of topology with a phandle, and we might want to describe
thread-affine devices in future.

There are a tonne of existing bindings that are ugly, but re-inventing
them for taste reasons alone is more costly to the ecosystem than simply
using the existing bindings. We avoid re-inventing bindings unless there
is a functional problem e.g. cases which they cannot possibly describe.

> Then let's allow the cluster and core nodes to accept attributes that are
> common for the cpus they contain. Right now this is considered invalid.
> 
> For power domains we have a generic binding described on
> Documentation/devicetree/bindings/power/power_domain.txt
> which basically says that we need to put power-domains = <power domain
> specifiers>
> attribute on each of the cpu nodes.

FWIW, given this is arguably topological, I'm not personally averse to
describing this in the cpu-map, if that actually gains us more than the
complexity require to support it.

Given we don't do this for device power domains, I suspect that it's
simpler to stick with the existing binding.

> The same happens with the capacity binding specified for arm on
> Documentation/devicetree/bindings/arm/cpu-capacity.txt
> which says we should add the capacity-dmips-mhz on each of the cpu nodes.

The cpu-map was intended to expose topological dtails, and this isn't
really a topological property. For example, Arm DynamIQ systems can have
heterogeneous CPUs within clusters.

I do not think it's worth moving this, tbh.

> The same also happens with the generic numa binding on
> Documentation/devicetree/bindings/numa.txt
> which says we should add the nuna-node-id on each of the cpu nodes.

Is there a strong gain from moving this?

[...]

> Finally from the examples above I'd like to stress out that the distinction
> between a cluster and a core doesn't make much sense and it also makes the
> representation more complicated. To begin with, how would you call the setup
> on HiFive Unleashed ? A cluster of 4 cores that share the same L3 cache ?

Not knowing much about the hardware, I can't really say.

I'm not sure I follow why the distinction between a cluster and a core
is non-sensical. A cluster is always a collection of cores.

A hart could be a core in its own right, or it could be a thread under a
core, which shares functional units with other harts within that core.

Arguably, we could have mandated that the topology always needed to
describe down to a thread, even if a core only had a single thread. That
ship has sailed, however.

Thanks,
Mark.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux