On Mon, Nov 5, 2018 at 12:43 AM Ryder Lee <ryder.lee@xxxxxxxxxxxx> wrote:
>
> This updates bindings for MT7629 pinctrl driver.
>
> Cc: Sean Wang <sean.wang@xxxxxxxxxx>
> Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 128 +++++++++++++++++++++
> 1 file changed, 128 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> index 3b69513..4dedce4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> @@ -3,6 +3,7 @@
> Required properties for the root node:
> - compatible: Should be one of the following
> "mediatek,mt7622-pinctrl" for MT7622 SoC
> + "mediatek,mt7629-pinctrl" for MT7629 SoC
> - reg: offset and length of the pinctrl space
>
> - gpio-controller: Marks the device node as a GPIO controller.
> @@ -324,6 +325,133 @@ group.
> "uart4_2_rts_cts" "uart" 95, 96
> "watchdog" "watchdog" 78
>
> +
> +== Valid values for pins, function and groups on MT7629 ==
> +
> + Pin #: Valid values for pins
> + -----------------------------
> + PIN 0: "TOP_5G_CLK"
> + PIN 1: "TOP_5G_DATA"
> + PIN 2: "WF0_5G_HB0"
> + PIN 3: "WF0_5G_HB1"
> + PIN 4: "WF0_5G_HB2"
> + PIN 5: "WF0_5G_HB3"
> + PIN 6: "WF0_5G_HB4"
> + PIN 7: "WF0_5G_HB5"
> + PIN 8: "WF0_5G_HB6"
> + PIN 9: "XO_REQ"
> + PIN 10: "TOP_RST_N"
> + PIN 11: "SYS_WATCHDOG"
> + PIN 12: "EPHY_LED0_N_JTDO"
> + PIN 13: "EPHY_LED1_N_JTDI"
> + PIN 14: "EPHY_LED2_N_JTMS"
> + PIN 15: "EPHY_LED3_N_JTCLK"
> + PIN 16: "EPHY_LED4_N_JTRST_N"
> + PIN 17: "WF2G_LED_N"
> + PIN 18: "WF5G_LED_N"
> + PIN 19: "I2C_SDA"
> + PIN 20: "I2C_SCL"
> + PIN 21: "GPIO_9"
> + PIN 22: "GPIO_10"
> + PIN 23: "GPIO_11"
> + PIN 24: "GPIO_12"
> + PIN 25: "UART1_TXD"
> + PIN 26: "UART1_RXD"
> + PIN 27: "UART1_CTS"
> + PIN 28: "UART1_RTS"
> + PIN 29: "UART2_TXD"
> + PIN 30: "UART2_RXD"
> + PIN 31: "UART2_CTS"
> + PIN 32: "UART2_RTS"
> + PIN 33: "MDI_TP_P1"
> + PIN 34: "MDI_TN_P1"
> + PIN 35: "MDI_RP_P1"
> + PIN 36: "MDI_RN_P1"
> + PIN 37: "MDI_RP_P2"
> + PIN 38: "MDI_RN_P2"
> + PIN 39: "MDI_TP_P2"
> + PIN 40: "MDI_TN_P2"
> + PIN 41: "MDI_TP_P3"
> + PIN 42: "MDI_TN_P3"
> + PIN 43: "MDI_RP_P3"
> + PIN 44: "MDI_RN_P3"
> + PIN 45: "MDI_RP_P4"
> + PIN 46: "MDI_RN_P4"
> + PIN 47: "MDI_TP_P4"
> + PIN 48: "MDI_TN_P4"
> + PIN 49: "SMI_MDC"
> + PIN 50: "SMI_MDIO"
> + PIN 51: "PCIE_PERESET_N"
> + PIN 52: "PWM_0"
> + PIN 53: "GPIO_0"
> + PIN 54: "GPIO_1"
> + PIN 55: "GPIO_2"
> + PIN 56: "GPIO_3"
> + PIN 57: "GPIO_4"
> + PIN 58: "GPIO_5"
> + PIN 59: "GPIO_6"
> + PIN 60: "GPIO_7"
> + PIN 61: "GPIO_8"
> + PIN 62: "SPI_CLK"
> + PIN 63: "SPI_CS"
> + PIN 64: "SPI_MOSI"
> + PIN 65: "SPI_MISO"
> + PIN 66: "SPI_WP"
> + PIN 67: "SPI_HOLD"
> + PIN 68: "UART0_TXD"
> + PIN 69: "UART0_RXD"
> + PIN 70: "TOP_2G_CLK"
> + PIN 71: "TOP_2G_DATA"
> + PIN 72: "WF0_2G_HB0"
> + PIN 73: "WF0_2G_HB1"
> + PIN 74: "WF0_2G_HB2"
> + PIN 75: "WF0_2G_HB3"
> + PIN 76: "WF0_2G_HB4"
> + PIN 77: "WF0_2G_HB5"
> + PIN 78: "WF0_2G_HB6"
> +
> +Valid values for function are:
> + "eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart", "watchdog"
Should we add "ext" as the function and its related groups explaining
in the below?
It seems a missing line happens here, that is
Valid values for groups are:
> +
> + Valid value function pins (in pin#)
> + -------------------------------------------------------------------------
> + "wf0_2g" "eth" 70, 71, 72, 73, 74, 75,
> + 76, 77, 78
> + "wf0_5g" "eth" 0, 1, 2, 3, 4, 5, 6, 7
> + 8, 9, 10
> + "mdc_mdio" "eth" 23, 24
> + "i2c_0" "i2c" 19, 20
> + "i2c_1" "i2c" 53, 54
> + "ephy_leds" "led" 12, 13, 14, 15, 16, 17, 18
> + "ephy0_led" "led" 12
> + "ephy1_led" "led" 13
> + "ephy2_led" "led" 14
> + "ephy3_led" "led" 15
> + "ephy4_led" "led" 16
> + "wf2g_led" "led" 17
> + "wf5g_led" "led" 18
> + "snfi" "flash" 62, 63, 64, 65, 66, 67
> + "spi_nor" "flash" 62, 63, 64, 65, 66, 67
> + "pcie_pereset" "pcie" 51
> + "pcie_wake" "pcie" 55
> + "pcie_clkreq" "pcie" 56
> + "pwm_0" "pwm" 52
> + "pwm_1" "pwm" 61
> + "spi_0" "spi" 21, 22, 23, 24
> + "spi_1" "spi" 62, 63, 64, 65
> + "spi_wp" "spi" 66
> + "spi_hold" "spi" 67
> + "uart0_txd_rxd" "uart" 68, 69
> + "uart1_0_txd_rxd" "uart" 25, 26
> + "uart1_0_cts_rts" "uart" 27, 28
> + "uart1_1_txd_rxd" "uart" 53, 54
> + "uart1_1_cts_rts" "uart" 55, 56
> + "uart2_0_txd_rxd" "uart" 29, 30
> + "uart2_0_cts_rts" "uart" 31, 32
> + "uart2_1_txd_rxd" "uart" 57, 58
> + "uart2_1_cts_rts" "uart" 59, 60
> + "watchdog" "watchdog" 11
> +
> Example:
>
> pio: pinctrl@10211000 {
> --
> 1.9.1
>
