On Sun, Mar 9, 2014 at 12:39 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote: > On Saturday 08 March 2014, Rob Herring wrote: >> On Fri, Mar 7, 2014 at 10:02 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote: > >> > a) Follow what we do for PCI devices: assume that we can do DMA_MASK(32) >> > on any device, and have drivers call dma_set_mask(DMA_MASK(64)) on devices >> > that would like to do more than that, or call e.g. dma_set_mask(DMA_MASK(28)) >> > for devices that can do less than 32 bit, as given in the argument. This >> > approach would be most consistent with the way PCI works, but it doesn't >> > really work well for the case where the mask is less than 32-bit and the >> > device driver doesn't know that. >> > >> > b) Never have to call dma_set_mask() for platform devices and assume that the >> > platform code sets it up correctly. This would probably be the simpler >> > solution, and I can't think of any downsides at the moment. >> >> I don't think we want this. In the case of setting up 64-bit masters, >> it is typically the device that knows if it can do 64-bit DMA either >> thru a capabilities register or compatible value. That device specific >> knowledge should really stay within the device's driver. > > So you think we should still set a 64-bit mask in the "ranges" property > for devices that can only do 32-bit and let the driver figure it out? No, I think option a makes more sense. BTW, don't you mean dma-ranges? A device has it's own mask which is typically going to be 32 or 64-bit. The core code may not know what the device supports, so the device has to set it's own mask. I don't see a way around that. DT is not a good option because it is discoverable in some cases. Isn't the question here how do we handle restrictions added by the bus? It seems while this series adds support for handling dma-ranges to set the default case, it also needs to handle when the driver sets the mask. Is this not simply a matter of having dma_set_mask also parse dma-ranges (or reuse a saved bus mask)? > I think this approach is much less useful for platform devices than it is > for PCI devices, where we don't explicitly describe the "ranges" for each > device. Are you thinking of off-chip or on-chip DMA masters here? If > on-chip, I don't think it's likely that we would end up with different > versions of the chip that have the same device on there but not the > same DMA capabilities. Sounds like a challenge to h/w designers. :) I'm mainly thinking about the midway case where all masters are 32-bit except AHCI which is 64-bit. The core libahci sets the mask based on the capabilities register regardless of PCI or platform bus. Requiring this to be setup by the platform or in the DT seems like a step backwards. A slightly more complicated case would be something like midway, but with RAM starting at say 2GB and DMA masters have the same view as the cpu (i.e. no offset). Then the platform does need to set the mask to (2^31 -1). Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
