[PATCH 14/23] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>

The reset value is all zero, so set a workable value for Primary,
Secondary and Subordinate bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
---
 drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 3da924bb6b3c..8d6a1e98f655 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -581,6 +581,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	u32 value, pab_ctrl, type;
 	struct resource_entry *win;
 
+	/* setup bus numbers */
+	value = csr_readl(pcie, PCI_PRIMARY_BUS);
+	value &= 0xff000000;
+	value |= 0x00ff0100;
+	csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
 	/*
 	 * program Bus Master Enable Bit in Command Register in PAB Config
 	 * Space
-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux