This is an automatic generated email to let you know that the following patch were queued:
Subject: media: imx214: device tree binding
Author: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
Date: Fri Oct 5 18:50:11 2018 -0400
Document bindings for imx214 camera sensor
[Sakari Ailus: Move MAINTAINERS entry here, fix DT binding filename]
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
.../devicetree/bindings/media/i2c/sony,imx214.txt | 53 ++++++++++++++++++++++
MAINTAINERS | 8 ++++
2 files changed, 61 insertions(+)
---
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
new file mode 100644
index 000000000000..f11f28a5fda4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
@@ -0,0 +1,53 @@
+* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
+
+The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+an active array size of 4224H x 3200V. It is programmable through an I2C
+interface.
+Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
+throughput of 1.2Gbps/lane.
+
+
+Required Properties:
+- compatible: Shall be "sony,imx214".
+- reg: I2C bus address of the device. Depending on how the sensor is wired,
+ it shall be <0x10> or <0x1a>;
+- enable-gpios: GPIO descriptor for the enable pin.
+- vdddo-supply: Chip digital IO regulator (1.8V).
+- vdda-supply: Chip analog regulator (2.7V).
+- vddd-supply: Chip digital core regulator (1.12V).
+- clocks: Reference to the xclk clock.
+- clock-frequency: Frequency of the xclk clock.
+
+Optional Properties:
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+The imx214 device node shall contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+
+ camera-sensor@1a {
+ compatible = "sony,imx214";
+ reg = <0x1a>;
+ vdddo-supply = <&pm8994_lvs1>;
+ vddd-supply = <&camera_vddd_1v12>;
+ vdda-supply = <&pm8994_l17>;
+ lens-focus = <&ad5820>;
+ enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+ clocks = <&mmcc CAMSS_MCLK0_CLK>;
+ clock-frequency = <24000000>;
+ port {
+ imx214_ep: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <480000000>;
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index f4855974f325..a8588dedc683 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13823,6 +13823,14 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX214 SENSOR DRIVER
+M: Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx214.c
+F: Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
+
SONY IMX258 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
