Re: [PATCH v1 1/2] dt-bindings: dmaengine: dw-dmac: add protection control property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 04, 2018 at 06:01:38PM +0100, Christian Lamparter wrote:
> This patch adds the per-channel dma protection control
> prop-encoded-array and dt-binding definitions (including
> definitions for the existing channel allocation and priority
> order values based on include/linux/platform_data/dma-dw.h)
> for the DesignWare AHB Central Direct Memory Access Controller.
> 
> Note: The protection control signals are one-to-one mapped to
> the AHB HPROT[1:3] signals.  The HPROT0 (Data Access) is
> always hardwired to 1 for this controller.
> 
> Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> ---
>  .../devicetree/bindings/dma/snps-dma.txt      |  4 ++++
>  MAINTAINERS                                   |  4 +++-
>  include/dt-bindings/dma/dw-dmac.h             | 20 +++++++++++++++++++
>  3 files changed, 27 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/dma/dw-dmac.h
> 
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index 39e2b26be344..72b4984a4c18 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -27,6 +27,10 @@ Optional properties:
>    general purpose DMA channel allocator. False if not passed.
>  - multi-block: Multi block transfers supported by hardware. Array property with
>    one cell per channel. 0: not supported, 1 (default): supported.
> +- snps,dma-protection-control: Channel's AHB HPROT[3:1] protection setting.
> +  Array property with one cell per channel. The default value for a channel
> +  is 0 (for non-cacheable, strongly ordered, unprivileged data access).

IIRC, 'strongly ordered' is outside the scope of AHB (and AXI) 
definitions. There is a mapping of SO page table entries to bus control 
signals, but that's part of the cpu and outside the scope of this doc.

> +  Refer to include/dt-bindings/dma/dw-dmac.h for possible values.

Do you really need this to be per channel rather than just per platform? 
If anything, the optimal setting is probably based on the memory address 
(device, on-chip RAM, or DRAM), not the channel. 

I'd expect for most platforms, bufferable works without any s/w issue
(and should be more correct in that coherent allocations are bufferable 
(at least for ARM). Cacheable probably has no effect as most systems 
don't have coherent i/o (again, at least for ARM).


>  Example:
>  
> diff --git a/MAINTAINERS b/MAINTAINERS
> index dacba23b80b4..c35998e20e9d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14107,9 +14107,11 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
>  M:	Viresh Kumar <vireshk@xxxxxxxxxx>
>  R:	Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/dma/snps-dma.txt
> +F:	drivers/dma/dw/
> +F:	include/dt-bindings/dma/dw-dmac.h
>  F:	include/linux/dma/dw.h
>  F:	include/linux/platform_data/dma-dw.h
> -F:	drivers/dma/dw/
>  
>  SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
>  M:	Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>
> diff --git a/include/dt-bindings/dma/dw-dmac.h b/include/dt-bindings/dma/dw-dmac.h
> new file mode 100644
> index 000000000000..9152a6e2406c
> --- /dev/null
> +++ b/include/dt-bindings/dma/dw-dmac.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +
> +#ifndef __DT_BINDINGS_DMA_DW_DMAC_H__
> +#define __DT_BINDINGS_DMA_DW_DMAC_H__
> +
> +#define DW_DMAC_CHAN_ALLOCATION_ASCENDING       0       /* zero to seven */
> +#define DW_DMAC_CHAN_ALLOCATION_DESCENDING      1       /* seven to zero */
> +#define DW_DMAC_CHAN_PRIORITY_ASCENDING         0       /* chan0 highest */
> +#define DW_DMAC_CHAN_PRIORITY_DESCENDING        1       /* chan7 highest */

These seem unrelated?

> +
> +/*
> + * Protection Control bits provide protection against illegal transactions.
> + * The protection bits[0:2] are one-to-one mapped to AHB HPROT[3:1] signals.
> + * The AHB HPROT[0] bit is hardwired to 1: Data Access.
> + */
> +#define DW_DMAC_HPROT1_PRIVILEGED_MODE	(1 << 0)	/* Privileged Mode */
> +#define DW_DMAC_HPROT2_BUFFERABLE	(1 << 1)	/* DMA is bufferable */
> +#define DW_DMAC_HPROT3_CACHEABLE	(1 << 2)	/* DMA is cacheable */
> +
> +#endif /* __DT_BINDINGS_DMA_DW_DMAC_H__ */
> -- 
> 2.19.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux