Re: [RFC 1/2] dt-bindings: topology: Add RISC-V cpu topology.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 02 Nov 2018 06:09:39 PDT (-0700), robh+dt@xxxxxxxxxx wrote:
On Thu, Nov 1, 2018 at 6:04 PM Atish Patra <atish.patra@xxxxxxx> wrote:

Define a RISC-V cpu topology. This is based on cpu-map in ARM world.
But it doesn't need a separate thread node for defining SMT systems.
Multiple cpu phandle properties can be parsed to identify the sibling
hardware threads. Moreover, we do not have cluster concept in RISC-V.
So package is a better word choice than cluster for RISC-V.

There was a proposal to add package info for ARM recently. Not sure
what happened to that, but we don't need 2 different ways.

There's never going to be clusters for RISC-V? What prevents that?
Seems shortsighted to me.


Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
---
 .../devicetree/bindings/riscv/topology.txt         | 154 +++++++++++++++++++++
 1 file changed, 154 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/topology.txt

diff --git a/Documentation/devicetree/bindings/riscv/topology.txt b/Documentation/devicetree/bindings/riscv/topology.txt
new file mode 100644
index 00000000..96039ed3
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/topology.txt
@@ -0,0 +1,154 @@
+===========================================
+RISC-V cpu topology binding description
+===========================================
+
+===========================================
+1 - Introduction
+===========================================
+
+In a RISC-V system, the hierarchy of CPUs can be defined through following nodes that
+are used to describe the layout of physical CPUs in the system:
+
+- packages
+- core
+
+The cpu nodes (bindings defined in [1]) represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
+Simultaneous multi-threading (SMT) systems can also represent their topology
+by defining multiple cpu phandles inside core node. The details are explained
+in paragraph 3.

I don't see a reason to do this differently than ARM. That said, I
don't think the thread part is in use on ARM, so it could possibly be
changed.

+
+The remainder of this document provides the topology bindings for ARM, based

for ARM?

+on the Devicetree Specification, available from:
+
+https://www.devicetree.org/specifications/
+
+If not stated otherwise, whenever a reference to a cpu node phandle is made its
+value must point to a cpu node compliant with the cpu node bindings as
+documented in [1].
+A topology description containing phandles to cpu nodes that are not compliant
+with bindings standardized in [1] is therefore considered invalid.
+
+This cpu topology binding description is mostly based on the topology defined
+in ARM [2].
+===========================================
+2 - cpu-topology node

cpu-map. Why change this?

What I would like to see is the ARM topology binding reworked to be
common or some good reasons why it doesn't work for RISC-V as-is.

I think it would be great if CPU topologies were not a RISC-V specific thing. We don't really do anything different than anyone else, so it'd be great if we could all share the same spec and code. Looking quickly at the ARM cpu-map bindings, I don't see any reason why we can't just use the same thing on RISC-V -- it's not quite how I'd do it, but I don't think the differences are worth having another implementation. Mechanically I'm not sure how to do this: should there just be a "Documentation/devicetree/bindings/cpu-map.txt"?

If everyone is OK with that then I vote we just go ahead and genericise the ARM "cpu-map" stuff for CPU topology. Sharing the implementation looks fairly straight-forward as well.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux